User's Manual

Elpas Handheld LF Exciter – Configuration & User Guide
Page 6 of 8
V15/March 11
www.visonictech.com
Configuration Procedure
To configure EIRIS so that a Handheld LF Exciter can be used by a caregiver to perform random match tests, you will first need to
define companion relationships between the appropriate mother tags and the corresponding baby tags. Then you will need to define
the subsequent Confirmation, Success and Failure alerts.
Step 1- Associate the Mother with the Baby
1. Access the Companions tab of the Badgematch
Configuration form. Select the Mother Tag you want to
associate a ‘Companion’ with; then click Add Companions.
2. Select the Baby Tag that is to be the ‘Companion’ to the
chosen mother tag.
Step 2- Define a Confirmation Alert
1. Using the Location Alert, on the Inputs form select
All Baby Tags, All Mother Tags and all HHLFs .Also
choose All Status Types.
2. Enter 10 in the ‘Automatically Close After’ time value field.
3. On the Outputs form, select the Confirmation Outputs
that will trigger the green lamps of the visual indicators.
4. Double click on the selected Outputs and for each, set the
output duration to 2 Seconds.
Step 3- Define a Success Alert
This alert is only enabled when the match test proves successful.
1. Using the Location Alert, on the Inputs form, select
All Baby Tags, All HHLFs. Also choose All Status Types.
2. On the Outputs form, select the Success Outputs that will
trigger the green lamps on the related visual indicators.
3. Double-click on the chosen Success Outputs and for each
set the output duration to 10 Seconds.
4. On the Override form, define/enable the Parameters or
Options as detailed below.