User's Manual

ALC LF BUS Beacon – Installation Guide
www.elpas.com
Page 8 of 12
V2/Dec 2014
Extended Properties in ALC Eiris Object
The ALC Extended Properties tab allows users to see how the optional settings of the device are set. The Extended
Properties tab also allows users to select readers to be associated with ALC.
 LF Id (Hex) field: Displays the hexadecimal representation of the set LF ID.
 Dip Switch field: Displays the binary representation of the set LF ID. 1 represents a DIP switch set as ON, o represents a DIP switch set
as off.
 Wiegand check-box: Selected when the top two input terminal are set as Wiegand.
 Wiegand Facility Code field: Enter the Facility Code programmed into the Wiegand device.
 Transmission Range field: Displays the set LF range level.
 Wiegand Bit Length drop-down list: Select the Wiegand bit length.
 Select readers that will be associated to LF: Select to enable reader selection. The readers list opens and allows you to select readers
to be associated with the ALC represented by this object.
 CPLD version field: Displays the current CPLD firmware file.
 RF version field: Displays the current RF firmware file.
Note: When you update the firmware in the General tab, notice there are two bin files. One for the CPLD, and one for the RF. The file
name indicates for which component it is. Update both files.
 Primary/Secondary field: Displays whether the ALC is set as Primary or Secondary.
 IN2/OC2 field: Displays whether the ALC third terminal is set as input 2 or O.C. output 2.
 Wiegand out/Digital inputs field: displays whether the top two terminal blocks are set as two digital inputs or as one Wiegand output.
 Door/Hallway field: Displays whether the ALC is set to be in Primary-Secondary door or hallway configuration (on the PCB, marked as A
or B, respectively).
Note: Select ALC Secondary LFs is not relevant for ALC with no RF (5-ALC010210).