User manual

Adding a Local Printer

<Step 1> After having attached the USB printer,

please press ‘Scan’ button and the found printer

will be listed. Press ‘Next’ to the next step.

<Step 2> Pick a proper driver to fit the local

printer then press ‘Next’ and end the installation.

<Step 3> Press “Test” button to test whether the

setting is correct or not, if the setting is incorrect,

the test page won’t be printed out, click Back to

modify the setting. Otherwise, click “Next”.

<Step 4> Enter the information of this shared

printer, Name column is necessary, Location is

optional and Description is entered by the

system, then click Next and press Finish

button to end the setting.

<Step 5> To set the printer as a default printer,

highlight the printer and press “Default” button.

To remove a printer, highlight it and press

“Remove” button.