User manual

ONE User Manual

Adding a Network Printer

In order to print you need to add a new printer using the following steps

<Step 1> Press ”Add” button to add a new printer

<Step 2> Check on “SMB shared printer” to use the

shared printer in the windows network. Then press

“Next” button.

<Step 3> Enter the login user ID and the password,

if the password authentication is necessary,

otherwise check on Anonymous or Guest account,

and then click “Next”.

<Step 4> Enter the IP address of the shared printer

and the shared name according to the setting of the present network environment, then click

“Next”.

<Step 5> Select the device driver and click “Next”.

<Step 6> Press “Test” button to test whether the

setting is correct or not, if the setting is incorrect,

the test page won’t be printed out, click Back to

modify the setting. Otherwise, click “Next”.

<Step 7> Enter the information of this shared printer,

Name column is necessary, Location is optional and

Description is entered by the system, then click Next

and press Finish button to end the setting.

<Step 8> To set the printer as a default printer, highlight the printer and press “Default”

button. To remove a printer, highlight it and press

“Remove” button.