User manual

ONE User Manual
27
USB Disk Drive
Once the USB disk drive has been plugged in, the ONE will automatically mount the disk on
the system and an USB disk icon will reside on the system tray and the contents of the disk
drive will pop up.
To remove the USB disk properly right click on the icon and choose Deviceinfo and the USB Mass
Storage windows will pop up. Right click the currently mounted USB disk and remove the attached
USB disk till the UDEV icon disappears.
If the auto-mounting procedure fails, the mounting procedure via Sys-manager will be necessary. Use
two buttons to mount and unmount the USB disk drive. Attach the USB disk drive into the USB
socket; the system will automatically detect the attached device. Follow the steps mentioned below
to mount (unmount) the USB disk drive：
<Step 1> After attaching the USB disk drive, press “Refresh”, the system will display the disk
partitions and list them in the “Device Info” column, highlight the partition to mount.
<Step 2> Press “mount device” button, the asterisk will appear in the state column and the attached
device has been mounted.
<Step 3> Choose the partition with an asterisk in the State column then press “umount” button, the
asterisk will disappear and the attached device has been unmounted.