User manual

20
<Step 7> In the “Receive” tab, enter the
relevant settings are here. (Default settings
are recommended)
<Step 8> The authentication methods can be
assigned in the tab “Send”. Check on “SMTP
Authentication (SMTP AUTH) then enter User
ID and Password (If the two columns are empty
then the application will use the User ID and
Password entered in the “Receive” tab for
sending the email.)
<Step 9> Message composition setting
includes the signature which has 2 formats:
direct input and pre-edited file. You can also set
up an automatic reply.
<Step 10> Mail security setting shall be
configured according to the mail
server: