Technical data

791342 Inst. Gas 2.0 15

Adjustment of CO2 content

• The lable indicating the type of gas and pre-set gas pressure, is located near the type plate.

• When converting the gas type, it is necessary to set the CO²-content according to the

overview in 3.2.

• The settings must be changed in the Service Menue.

• Loosening the regulating screw increases the CO² content.

• Tightening the regulating screw decreases the CO² content.

• The suction hose should be mounted on the Venturi before the setting, if necessary.

Î After the conversion to another kind of gas

- all gas-prominent parts must be checked for leak-tightness (leak detection spray),

- attach lables indicating gas type and pressure (mbar) on the combisteamer.

Adjusting screw

2 content

Venturi