User guide

ManualsBrandsElo ManualsCash registersPayPoint® for Android™ — with Android Open Source (Rev B)

INSTALLATION INSTRUCTIONS:

E953516 KIT-EMV-INGENICO ICMP CRADLE-PAYPOINT

E002639 KIT-EMV-VERIFONE E355 CRADLE-PAYPOINT

Pg.1

QIG600028 Rev. A

1- Add payment

module to bracket (1)

2- Add USB cable, route as shown.

3- Add payment module/bracket (1) to bracket (2)

with 2 screws from bag L.

Screws,

Summary of content (10 pages)

PAGE 1
INSTALLATION INSTRUCTIONS: E953516 KIT-EMV-INGENICO ICMP CRADLE-PAYPOINT E002639 KIT-EMV-VERIFONE E355 CRADLE-PAYPOINT 1 1- Add payment module to bracket (1) 2 Screws, X2 3- Add payment module/bracket (1) to bracket (2) with 2 screws from bag L. 2- Add USB cable, route as shown. QIG600028 Rev. A Pg.
PAGE 2
INSTALLATION INSTRUCTIONS: E953516 KIT-EMV-INGENICO ICMP CRADLE-PAYPOINT E002639 KIT-EMV-VERIFONE E355 CRADLE-PAYPOINT 3 4- Attach payment module assy. to bracket (3) with 4 screws from bag G. 5- Attach module + bracket (3) using 2 screws from bag K. Attach module USB cable to computer accessory port. Use provided USB type A adapter where needed. QIG600028 Rev. A Pg.
PAGE 3
INSTALLATION INSTRUCTIONS: E200788 KIT-EMV-INGENICO ICMP CRADLE-X/IDS02 E201363 KIT-EMV-VERIFONE E355 CRADLE-X/IDS02 2 1 Screws, X2 1- Add payment module to bracket (1) 3- Add payment module/bracket (1) to bracket (2) with 2 screws from bag C. 2- Add USB cable, route as shown. For X-series, see pg. 2. For IDS-series, see pg. 3. 10”/15”/22” landscape = short cable. 15”/22” portrait = long cable. QIG600028 Rev. A Pg.
PAGE 4
INSTALLATION INSTRUCTIONS: E200788 KIT-EMV-INGENICO ICMP CRADLE-X/IDS02 E201363 KIT-EMV-VERIFONE E355 CRADLE-X/IDS02 X-series 3 L USB QIG600028 Rev. A 4- Attach module USB cable to computer 5- Attach payment module assy. to accessory port. Attach bracket (3) using 2 screws from bag A. bracket (3) with 2 screws from bag D. (Partially attach L screw first and slide on module to aid assy.). Pg.
PAGE 5
INSTALLATION INSTRUCTIONS: E200788 KIT-EMV-INGENICO ICMP CRADLE-X/IDS02 E201363 KIT-EMV-VERIFONE E355 CRADLE-X/IDS02 IDS-series 8- Remove two existing screws from IDS back-cover (green circles). Attach bracket (5) using 2 screws from bag H. Add one screw (5b) from bag A. 4 5b USB 6- Attach module USB cable to computer accessory port. Attach bracket (3) using 2 screws from bag A. 5 L 7- Attach payment module assy. to bracket (4) with 2 screws from bag D.
PAGE 6
INSTALLATION INSTRUCTIONS: E200465 KIT-EMV-INGENICO ICMP CRADLE-I/M E201088 KIT-EMV-VERIFONE E355 CRADLE-I/M 2 1 Screws, X2 1- Add payment module to bracket (1) 3- Add payment module/bracket (1) to bracket (2) with 2 screws from bag C. 3 2- Add USB cable, route as shown. 10”/15”/22” landscape = short cable. 15”/22” portrait = long cable. (Use table or box edge to aid assembly) 4- Attach payment module assy. to bracket (3) with 2 screws from bag D.
PAGE 7
INSTALLATION INSTRUCTIONS: E200465 KIT-EMV-INGENICO ICMP CRADLE-I/M E201088 KIT-EMV-VERIFONE E355 CRADLE-I/M For display in landscape orientation, see pg. 3 - QIG600028 Rev. A For display in portrait orientation, see pg. 5 - Pg.
PAGE 8
INSTALLATION INSTRUCTIONS: E200465 KIT-EMV-INGENICO ICMP CRADLE-I/M E201088 KIT-EMV-VERIFONE E355 CRADLE-I/M 4 8- Attach bracket (4) using 2 screws from bag A. 6- Attach needed cables to computer / display (eg. pwr., video, USB,). Replace L/R cable doors. 5 Bracket (5) up = 2002L Down = ESY22i, ESY15i, 1502L 8b- Add bracket (5) to bracket (4) 7- Attach module USB cable to using 2 screws from bag J. For models 2002L, 1502L, ESY22i, ESY15i. computer accessory port. QIG600028 Rev. A Pg.
PAGE 9
INSTALLATION INSTRUCTIONS: E200465 KIT-EMV-INGENICO ICMP CRADLE-I/M E201088 KIT-EMV-VERIFONE E355 CRADLE-I/M 6 9- Attach bracket (3) assy. to VESA mount with 2 M4 flat head screws*. For all systems larger than 10”, attach bracket (6) with 2 M4 flat head screws* (red arrows). *Use screws in bag E for 10”/15” systems, bag F for systems larger than 15”. Attach bracket (3) assy. to bracket (4) or (5) using screw(s) from bag A (red circles). One screw in mid. hole for ESY15/22i.
PAGE 10
INSTALLATION INSTRUCTIONS: E200465 KIT-EMV-INGENICO ICMP CRADLE-I/M E201088 KIT-EMV-VERIFONE E355 CRADLE-I/M 4 USB 10- Attach needed cables to computer / display (eg. pwr., video, USB,). Replace L/R cable doors. 11- Attach bracket (3) assy. to VESA mount with 4 M4 flat head screws* (red arrows). *Use screws in bag E for 10”/15” systems, bag F for systems larger than 15”. Attach module USB cable to computer accessory port. Attach bracket (4) using 2 screws from bag A. (red circles).