User`s guide

Appendix A - Error Messages CARROLL TOUCH
A-10 Touch System Diagnostics (CTDIAG) User’s Guide
Message: Touch System Init Failed - Unable To
Send Command
Meaning: The system is unable to send one of the commands in the
initialization process.
Action: Select Debug from the Test Menu and examine the
Trace history to determine more about the condition.
Message: Unable to open file
Meaning: CTDIAG is unable to open a DOS file in which to place
a copy of the Trace buffer.
Action: Check that there is space available on the disk and that
the disk is not write-protected.
Message: Unable to Send Command - Coordinate
Ranges Report
Meaning: An attempt to send the
GetCoordinateRange
command
is not completed.
Action: Select Debug from the Test Menu and examine the
Trace history to determine more about the condition.
Message: Unable to Send Command -
SetTouchModes Command
Meaning: An attempt to send the
SetTouchMode
command is not
completed.
Action: Select Debug from the Test Menu and examine the
Trace history to determine more about the condition.
Table A-1. Error Messages (Continued)