User`s guide

Appendix A - Error Messages CARROLL TOUCH
A-2 Touch System Diagnostics (CTDIAG) User’s Guide
Table A-1. Error Messages
Message: An attempt to initialize the touch
system using the command line
parameters failed.
Check the command line parameters for
correct values.
Check to insure that the touch system
is installed properly.
Press ‘ENTER’ to proceed to the
configuration menu or press ‘ESC’ to
exit.
Meaning: The specified command line parameters failed to
initialize the touch system.
Action: Take the corrective action specified and either proceed to
the Test Configuration Menu or exit.
Message: An attempt to initialize the touch
system using the CTDIAG touch system
default values failed.
If your touch system is set up for
different values, use the command line
options to define your touch system.
Check to insure that the touch system
is installed properly.
Press ‘ENTER’ to proceed to the
configuration menu or press ‘ESC’ to
exit.
Meaning: The CTDIAG default values failed to initialize the touch
system.
Action: Take the corrective action specified and either proceed to
the Test Configuration Menu or exit.