User`s guide

Chapter 7 - Debug CARROLL TOUCH
7-8 Touch System Diagnostics (CTDIAG) User’s Guide
Figure 7-4. Debug Screen: SFP Touch Coordinates
6. Press F4 to copy the trace buffer into the Trace Buffer screen, as
shown in Figure 7-5. Data in the buffer is displayed in a continuous
stream. Note that the 13 sets of touch coordinates now appear in the
trace buffer.
Figure 7-5. Trace Buffer Screen: SFP Touch Coordinates
7. Touch the display again and move your finger around, noting that
no change occurs on the Trace Buffer screen. Press ESC to return to
the Debug screen. The presence of your finger in the touch frame
while you were viewing the Trace Buffer screen increased the
number of coordinate reports displayed in the receive window.