User`s guide

About MonitorMouse for OS/2 3
MonitorMouse for OS/2 will work with the Elo touchscreen controllers listed
below. E281{A}-4002 refers to both the E281-4002 and E281A-4002 controllers.
Likewise, E281{A}-4025 refers to both the E281-4025 and E281A-4025
controllers.
Controller Model Interface Touchscreen T
yp
e
E281-2300 RS-232 IntelliTouch
E281
{
A
}
-4002 RS-232 IntelliTouch
E271-2210 RS-232 AccuTouch
E271-140 RS-232 AccuTouch
E281-4035 PC-Bus IntelliTouch
E281
{
A
}
-4025 PC-Bus IntelliTouch
E271-2201 PC-Bus AccuTouch
E271-141 PC-Bus AccuTouch
E271-2202 Micro Channel AccuTouch
The following obsolete part numbers may be cross-referenced to some of the
controller model numbers referred to above.
Part Number Controller Model
00285X-XXX Enclosure Contains E281-4002 IntelliTouch
Serial Controller, configured for
Stream Mode, Binary Mode, Z-Axis
Enabled, 9600 Baud.
E271-3 Enclosure Contains E271-140 AccuTouch
Serial Controller, configured for
2400 Baud, 8-Bit Data, Binary
Mode, Filtered Mode, Stream
Mode.
002710-XXX Controller E271-140 AccuTouch Serial
Controller
002714-XXX Controller E271-141 AccuTouch PC-Bus
Controller
00285X-2-XXX Controller E281-4002 IntelliTouch Serial
Controller.
00285X-25-XXX Controller E281-4025 IntelliTouch PC-Bus
Controller.