User`s guide

45
$SSHQGL['
Installation for AVC
To use MonitorMouse for OS/2 with IBM Audio Visual Connection (AVC)
multimedia authoring tool, perform the following additional steps after verifying
correct operation of the touchscreen with pRESENTATION Manager.
1. Extract the TOUCH.SYS and VTOUCH.SYS files from your OS/2 disks or
CD-ROM. Place TOUCH.SYS in the \OS2 directory and VTOUCH.SYS in
\OS@\MDOS directory.
2. Add DEVICE commands to your CONFIG.SYS file for TOUCH.SYS nad
VTOUCH.SYS as in the following example. These commands are in addition
to the change described in Chapter 2.
DEVICE=C:\ELO\MONMOU0X.SYS [existing parameters]
DEVICE=C:\OS2\TOUCH.SYS TYPE=ELOTOU$
DEVICE=C:\OS2\MDOS\VTOUCH.SYS
DEVICE=C:\OS2\MOUSE.SYS [existing parameters]
3. Reboot.
If the touchscreen does not appear properly calibrated in AVC applications, verify
that Presentation Manager is running in 640x480 resolution and recalibrate the
touchscreen with the Touchscreen Control Panel