User`s guide

Controller Data Sheets 27
IntelliTouch Serial Controller (E281-2300)
Verify the controller’s jumper settings are as follows:
(From Left)
9600 Baud J0 - N
J1 - N
Binary Mode J2 - N
Hardware handshaking enabled J3 - N
Stream Mode J4 - N
Reserved J5 - N
Reserved J6 - N
Power-on settings from jumpers J7 - Y
Reserved J8 - N
Reserved J9 - N
Emulation mode disabled J10 - N
J11 - N
Jumpers cross-connected horizontally on the bottom pins of the jumper block have
no effect and are available as extra jumpers.