User`s guide

26 Appendix A - Configuring Your Controller
The following table lists the devices normally assigned to each IRQ:
IRQ Device
2 Mapped to IRQ9
3COM2
4COM1
5LPT2
6 Floppy disk controller
7LPT1
Below are Elo’s recommendations for choosing an interrupt, in order of preference.
Skip the IRQ if a conflict may exist.
5, 7, 2, 3, 4, 6
C
ONTROLLER
D
ATA
S
HEETS
Setup information for each controller begins on a new page. Skip to the appropriate
page for your controller.
Controller Page
IntelliTouch Serial Controller (E281-2300)
27
IntelliTouch Serial Controller (E281{A}-4002) 28
AccuTouch Serial Controller (E271-2210)
29
AccuTouch Serial Controller (E271-140)
30
IntelliTouch PC-Bus Controller (E281-4035)
31
IntelliTouch PC-Bus Controller (E281{A}-4025)
33
AccuTouch PC-Bus Controller (E271-2201)
35
AccuTouch PC-Bus Controller (E271-141)
36
AccuTouch Micro Channel Controller (E271-2202)
38
NOTE
Switches may be labeled either OFF/ON or OPEN/CLOSE, depending on your
controller. The data sheet tables always list switch positions as OFF (open) or ON
(close).