User`s guide

7

Installing MonitorMouse for
OS/2
•
Before you Begin
7
•
Configure your Controller
8
•
Copy the Software
8
•
Modify CONFIG.SYS
9
•
Install the Touchscreen Control Panel
14
•
Calibrate the Touchscreen
14
•
Installing the Elo Wallpaper
15
B
EFORE YOU
B
EGIN
First be sure OS/2 is installed and operating properly with your mouse.
As you will be modifying the CONFIG.SYS file, it is best to have the OS/2
installation disks or a bootable DOS disk readily available. This way, any problems
in CONFIG.SYS which cause the system not to boot can be corrected by rebooting
from the disk(s).
Five steps are required when installing MonitorMouse for OS/2: