User guide

Elo LCD Touchmonitor User Guide- 16
Model
Technical Specifications
ET1825L-8SWA-1
ET1825L-7SWA-1
ET1866L-8SNA-1
ET1866L-7SNA-1
ET1886L-8SNA-1
ET1886L-7SNA-1
Display Size & Type 18.1” (46.3 cm) diagonal active matrix color TFT LCD
Useable Screen Area 14.4” (359 mm) x 11.3” (287mm)
Optimal (Native) Resolution 1280 x 1024 @ 60Hz
Other Supported Resolutions
720 x 400*: VGA text
640 x 480 @ 60Hz to 76Hz
800 x 600* @ 56Hz to 76Hz
832 x 624* @ 75Hz
1024 x 768* @ 60Hz to 76Hz
1152 x 900* @ 66Hz (SUN)
1280 x 960 @ 60Hz to 76Hz
Colors Unlimited (Depends on Display Card)
Viewing Angle
+ 85? or 170? total
Contrast Ratio 150: 1
Brightness AccuTouch 150 cd/m2: Intellitouch 185 cd/m2
Input Video Signal
ANALOG 0.7 Vp-p/75 Ohms
Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Sync on Green video (Positive) 0.7 Vp-p and sync.
Negative 0.3 Vp-p
Input Power Source
External Universal AC/DC power adaptor. 12Vdc
0.9A @ 100 120 V/0.5A @ 220 240 V
Scanning Frequency
Horizontal 24-80 kHz Automatically
Vertical 56-76 Hz Automatically
Environmental
Operating Temperature
5?C to 35?C, 41?F to 95?F
Storage Temperature
-10?C to 60?C, 14?F to 140?F
Humidity 80% max.
Altitude 0 to 10,000’
Touchscreen Connector
DB9 Attached
Cable
Serial DB9 Serial DB9
Physical Dimensions
Width 17.80” (452 mm) 19.0” (483 mm) 17.23” (437 mm)
Height 15” (382 mm) 17” (432 mm) 14.6” (371 mm)
Depth 10.3” (262 mm) 3.00” (76 mm) 2.9” (74 mm)
Weight (Approximate)
Actual 24 lbs (10.9 kg) 14 lbs (6.35 kg) 12 lbs (5.4 kg)
Shipping 26 lbs (11.8 kg) 16 lbs (7.3 kg) 14 lbs (6.35 kg)
* Interpolated Resolutions: When resolutions are shown that are lower than the pixel count of the LCD module, text may appear choppy or
lines may appear to be bold. This is normal and necessary for all current flat panel technologies when displaying non-native resolutions full
screen. In flat panel technologies, each dot on the screen is actually one pixel, so to expand resolutions to full screen, an interpolation of
the resolution must be done. When the interpolated resolution is not an exact multiple of the native resolution, the mathematical
interpolation necessary may cause some lines to appear thicker than others.
NOTE: Technical specifications are subject to change without notice.
Appendix B Technical Specifications