User guide
Table Of Contents
- User Guide
- Chapter 1
- Chapter 2
- Unpacking Your Touchmonitor
- Getting Started
- Connecting Your Touchmonitor
- Important:
- 1 Connect the video cable to the video connector on your PC. Secure the cable to your PC by turni...
- 2 Connect the power cable to the AC connector on your touchmonitor. To protect your equipment aga...
- 3 Connect the touchscreen cable. Determine if you have RS-232 or USB. Connect one end to the appr...
- 4 Power on your monitor using the Soft power switch and check that the power LED is on, then powe...
- 5 After a brief pause the picture should appear. If necessary, adjust the front panel controls ac...
- 6 Insert the Elo TouchTools CD-ROM in your computer’s CD-ROM drive to install the appropriate tou...
- Important:
- Installing the Driver Software
- Installing the Serial Touch Driver for Windows 2000, Me, 95/98 and NT 4.0
- Note:
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Installing the USB Touch Driver for Windows 2000, Windows Me and Windows 98
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next.
- 3 When a list of search locations is displayed, place a checkmark on “Specify a location” and use...
- 4 Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose Next ag...
- 5 You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.
- Note
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the ...
- 3 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Chapter 3
- About Touchmonitor Adjustments
- Touchmonitor Controls
- Using the On Screen Display (OSD)
- 1 Push the MENU button to access the OSD. The resolution and frequency are displayed at the top o...
- 2 Push the or button to choose the item you want to adjust. The selected item is highlighted.
- 3 Push the SELECT button to adjust the highlighted item.
- 4 Push the or button to adjust the selection.
- 5 Push the SELECT button to return to the previous menu if you are in a submenu.
- Brightness
- Contrast
- OSD Adjustments
- Note:
- Using the On Screen Display (OSD)
- Chapter 4
- Appendix A
- Appendix B
- Regulatory Information
- Appendix C
- Warranty
- Index
- Guide d’utilisation
- GARANTIE
- Index
- Gebrauchsanweisung
38 Elo Entuitive Touchmonitor Guide de l’utilisateur
CECI CONSTITUE LE RECOURS EXCLUSIF DE L’ACHETEUR EN CAS
DE VIOLATION DE LA GARANTIE. A L’EXCEPTION DE LA GARANTIE
EXPLICITE SUSMENTIONNEE, LE VENDEUR NE DONNE AUCUNE
AUTRE GARAN-TIE, EXPRESSE OU IMPLICITE, STATUTAIRE OU
AUTRE, CONCERNANT LES PRODUITS, LEUR APTITUDE A UNE FIN
PARTICULIERE, LEUR QUALITE, LEUR QUALITE MARCHANDE,
LEUR CONFORMITE A LA PRESENTE OU AUTRE. AUCUN EMPLOYE
DU VENDEUR NI AUCUNE AUTRE PARTIE NE SONT AUTORISES A
DONNER DE GARANTIE POUR LES MARCHANDISES
AUTRE QUE LA GARANTIE STIPULEE DANS LA PRESENTE. LA
RESPONSA-BILITE DU VENDEUR EN VERTU DE LA PRESENTE SERA
LIMITEE AU REMBOURSEMENT DU PRIX D’ACHAT DU PRODUIT. EN
AUCUN CAS LE VENDEUR NE POURRA ETRE TENU RESPONSABLE
DU COUT D’ACQUISITION OU D’INSTAL-LATION DE PRODUITS DE
REMPLACEMENT PAR L’ACHETEUR OU DE DOMMAGES SPECIAUX,
INDIRECTS, OU ACCESSOIRES.
L'Acheteur assume les risques et périls et accepte d'indemniser et de tenir le
Vendeur à couvert contre toute demande de dommages et intérêts liée à (i)
l'évaluation du caractère adéquat des Produits pour l'application de l'Acheteur et
de la conception ou du dessin des systèmes et (ii) à la vérification de la
confor-mité de l'utilisation des Produits par l'Acheteur avec les lois, règ-lements,
codes, et normes applicables. L'Acheteur conserve et accepte l'entière
responsabilité des réclamations au titre de la garantie et autres, découlant des
produits de l'Acheteur, dont les Produits ou composants fabriqués ou fournis par
le Vendeur. L'Acheteur est seul responsable des déclarations et garanties
concernant les Produits fabriqués ou autorisés par l'Acheteur. L'Acheteur
s'engage à indemniser et à tenir le Vendeur couvert en cas de demande en
dommages-intérêts, de réclamations, de perte, coût ou honoraires (y compris des
frais d'avocat raisonnables) imputables aux produits, aux décla-rations ou aux
garanties de l'Acheteur concernant ceux-ci.
Elo TouchSystems Tel +33 (0)1 56 93 35 60 · www.elotouch.com
Les utilisateurs doivent faire évaluer le caractère adéquat du produit pour leur
appli-cation par un expert indépendant.