User guide
Table Of Contents
- User Guide
- Chapter 1
- Chapter 2
- Unpacking Your Touchmonitor
- Getting Started
- Connecting Your Touchmonitor
- Important:
- 1 Connect the video cable to the video connector on your PC. Secure the cable to your PC by turni...
- 2 Connect the power cable to the AC connector on your touchmonitor. To protect your equipment aga...
- 3 Connect the touchscreen cable. Determine if you have RS-232 or USB. Connect one end to the appr...
- 4 Power on your monitor using the Soft power switch and check that the power LED is on, then powe...
- 5 After a brief pause the picture should appear. If necessary, adjust the front panel controls ac...
- 6 Insert the Elo TouchTools CD-ROM in your computer’s CD-ROM drive to install the appropriate tou...
- Important:
- Installing the Driver Software
- Installing the Serial Touch Driver for Windows 2000, Me, 95/98 and NT 4.0
- Note:
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Installing the USB Touch Driver for Windows 2000, Windows Me and Windows 98
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next.
- 3 When a list of search locations is displayed, place a checkmark on “Specify a location” and use...
- 4 Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose Next ag...
- 5 You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.
- Note
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the ...
- 3 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Chapter 3
- About Touchmonitor Adjustments
- Touchmonitor Controls
- Using the On Screen Display (OSD)
- 1 Push the MENU button to access the OSD. The resolution and frequency are displayed at the top o...
- 2 Push the or button to choose the item you want to adjust. The selected item is highlighted.
- 3 Push the SELECT button to adjust the highlighted item.
- 4 Push the or button to adjust the selection.
- 5 Push the SELECT button to return to the previous menu if you are in a submenu.
- Brightness
- Contrast
- OSD Adjustments
- Note:
- Using the On Screen Display (OSD)
- Chapter 4
- Appendix A
- Appendix B
- Regulatory Information
- Appendix C
- Warranty
- Index
- Guide d’utilisation
- GARANTIE
- Index
- Gebrauchsanweisung
37
C
HAPTER
4
G
ARANTIE
Sauf dispositions contraires dans la présente ou dans un récépissé de commande
remis à l'Acheteur, le Vendeur garantit à l'Acheteur que le produit sera exempt
de défaut de maté-riaux et de fabrication. Voir la fiche technique correspondante
pour les écrans tactiles
Le Vendeur ne donne aucune garantie concernant la durée de vie des moniteurs.
Les fournisseurs du Vendeur peuvent de temps à autre apporter des
modifications aux moniteurs livrés comme Produits ou composants.
En cas de défectuosité du Produit, l'Acheteur devra envoyer au Vendeur un avis
écrit dans les plus brefs délais (trente [30] jours maximum après la découverte
du défaut); décrire en termes détaillés et commercialement raisonnables les
symptômes associés à la défectuosité constatée; et donner au Vendeur la
possibilité d'inspecter le(s) Produit(s) installé(s), dans la mesure du possible.
Cet avis devra parvenir au Vendeur pendant la période de garantie du produit
concerné, sauf indications contraires stipulées par celui-ci. Dans un délai de
trente (30) jours après envoi de cet avis, l'Acheteur devra emballer le Produit
présumé défectueux dans son emballage d'ori-gine ou un équivalent fonctionnel
et l'expédier au Vendeur à ses frais et à ses risques.
Dans un délai raisonnable suivant la réception du Produit présumé défectueux et
après vér-ification par le Vendeur que le Produit n'est pas conforme aux termes
de la garantie susmentionnés, le Vendeur s'engage à corriger le problème, à son
choix, soit en (i) modifiant ou réparant le Produit (ii) soit en le remplaçant. Les
frais de modifications, de réparations ou de remplacement et de réexpédition du
Produit, accompagnée d'une assurance minimum, seront pris en charge par le
Vendeur. Le risque de perte ou de dommage au cours du transport sera supporté
par l'Acheteur qui peut, s'il le souhaite, assurer le Produit. S'il s'avère que le
Produit retourné n'est pas défectueux, l'Acheteur sera tenu de rembourser les
frais de transport au Vendeur. Les modifications ou réparations pourront, au
choix du Vendeur, être effectuées chez celui-ci ou chez l'Acheteur. Si le
Vendeur ne peut modifier, réparer ou remplacer un Produit défectueux, il devra
soit rembourser l'Acheteur, soit créditer son compte du montant correspondant
au prix d'achat du Produit, moins la dépréciation calculée selon la méthode de
l'amortissement constant pendant la durée de la garantie spécifiée par le
Vendeur.