User guide
Table Of Contents
- User Guide
- Chapter 1
- Chapter 2
- Unpacking Your Touchmonitor
- Getting Started
- Connecting Your Touchmonitor
- Important:
- 1 Connect the video cable to the video connector on your PC. Secure the cable to your PC by turni...
- 2 Connect the power cable to the AC connector on your touchmonitor. To protect your equipment aga...
- 3 Connect the touchscreen cable. Determine if you have RS-232 or USB. Connect one end to the appr...
- 4 Power on your monitor using the Soft power switch and check that the power LED is on, then powe...
- 5 After a brief pause the picture should appear. If necessary, adjust the front panel controls ac...
- 6 Insert the Elo TouchTools CD-ROM in your computer’s CD-ROM drive to install the appropriate tou...
- Important:
- Installing the Driver Software
- Installing the Serial Touch Driver for Windows 2000, Me, 95/98 and NT 4.0
- Note:
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Installing the USB Touch Driver for Windows 2000, Windows Me and Windows 98
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next.
- 3 When a list of search locations is displayed, place a checkmark on “Specify a location” and use...
- 4 Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose Next ag...
- 5 You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.
- Note
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the ...
- 3 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Chapter 3
- About Touchmonitor Adjustments
- Touchmonitor Controls
- Using the On Screen Display (OSD)
- 1 Push the MENU button to access the OSD. The resolution and frequency are displayed at the top o...
- 2 Push the or button to choose the item you want to adjust. The selected item is highlighted.
- 3 Push the SELECT button to adjust the highlighted item.
- 4 Push the or button to adjust the selection.
- 5 Push the SELECT button to return to the previous menu if you are in a submenu.
- Brightness
- Contrast
- OSD Adjustments
- Note:
- Using the On Screen Display (OSD)
- Chapter 4
- Appendix A
- Appendix B
- Regulatory Information
- Appendix C
- Warranty
- Index
- Guide d’utilisation
- GARANTIE
- Index
- Gebrauchsanweisung

C-30 Elo Entuitive Touchmonitor Guide de l’utilisateur
Ecran de 17" Ecran de 15"
Compatibilité
Plug and Play
Conforme aux normes VESA DDC 1/ 2B Conforme aux normes VESA DDC 1/ 2B
Durée de vie du CRT
La durée de vie opérationnelle du CRT
est de 12 000 heures jusqu’à la demi-
luminosité.
La durée de vie opérationnelle du CRT
est de 12 000 heures jusqu’à la demi-
luminosité.
Réglages à l’écran
POSITION H/V, TAILLE H/V, EFFET
DE COUSSIN, TRAPEZE,
PARALLELOGRAMME, EFFET DE
VOILE, MOIRE.H/V, LANGUES,
ROTATION, POSITION H/V OSD,
CONTROLE DES COULEURS,
RAPPEL, INFORMATION,
DEMAGNETISATION, LUMINOSITE,
CONTRASTE
POSITION H/V, TAILLE H/V, EFFET
DE COUSSIN, TRAPEZE,
PARALLELOGRAMME, EFFET DE
VOILE, MOIRE.H/V, LANGUES,
ROTATION, POSITION H/V OSD,
CONTROLE DES COULEURS,
RAPPEL, INFORMATION,
DEMAGNETISATION, LUMINOSITE,
CONTRASTE
Règlements de
sécurité
UL, cUL, DHHS, TÜVGS UL, cUL, DHHS, TÜVGS
EMI
TCO95, FCC Classe B, (FCC Classe A
pour les modèles sans contrôleurs
tactiles), CE
FCC Classe B, (FCC Classe A pour les
modèles sans contrôleurs tactiles), CE,
TCO95
Ergonomie
ZH1/618:10.80; DIN EN 2941-3:1993
ISO/DIS 9241-7,-8:1986; Écrans
antireflet : Partie 7, classe 1.
Écrans sans revêtement antireflet : Partie
7, classe 3.
ZH1/618:10.80; DIN EN 2941-3:1993
ISO/DIS 9241-7,-8:1986; Écrans
antireflet : Partie 7, classe 1.
Écrans sans revêtement antireflet : Partie
7, classe 3.
Dimensions du
moniteur
404mm (L) x 408mm (H) x 420mm (P) 360 mm (L) x 377 mm (H) x 392mm (P)
Poids net (sans écran
tactile)
13,7kg déballé, 16,7kg emballé 11,7 kg déballé, 13,5 kg emballé
Température
ambiante
En fonctionnement : 0°C - 40°C
En entreposage: -20°C - 65°C
En fonctionnement : 0°C - 40°C
En entreposage : -20°C - 65°C
Humidité
En fonctionnement : 20%-95%
En entreposage : 10%-95%
En fonctionnement : 20%-95%
En entreposage : 10%-95%
*Dépend du contrôleur vidéo ou de la carte utilisée