User guide
Table Of Contents
- User Guide
- Chapter 1
- Chapter 2
- Unpacking Your Touchmonitor
- Getting Started
- Connecting Your Touchmonitor
- Important:
- 1 Connect the video cable to the video connector on your PC. Secure the cable to your PC by turni...
- 2 Connect the power cable to the AC connector on your touchmonitor. To protect your equipment aga...
- 3 Connect the touchscreen cable. Determine if you have RS-232 or USB. Connect one end to the appr...
- 4 Power on your monitor using the Soft power switch and check that the power LED is on, then powe...
- 5 After a brief pause the picture should appear. If necessary, adjust the front panel controls ac...
- 6 Insert the Elo TouchTools CD-ROM in your computer’s CD-ROM drive to install the appropriate tou...
- Important:
- Installing the Driver Software
- Installing the Serial Touch Driver for Windows 2000, Me, 95/98 and NT 4.0
- Note:
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Installing the USB Touch Driver for Windows 2000, Windows Me and Windows 98
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next.
- 3 When a list of search locations is displayed, place a checkmark on “Specify a location” and use...
- 4 Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose Next ag...
- 5 You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.
- Note
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the ...
- 3 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Chapter 3
- About Touchmonitor Adjustments
- Touchmonitor Controls
- Using the On Screen Display (OSD)
- 1 Push the MENU button to access the OSD. The resolution and frequency are displayed at the top o...
- 2 Push the or button to choose the item you want to adjust. The selected item is highlighted.
- 3 Push the SELECT button to adjust the highlighted item.
- 4 Push the or button to adjust the selection.
- 5 Push the SELECT button to return to the previous menu if you are in a submenu.
- Brightness
- Contrast
- OSD Adjustments
- Note:
- Using the On Screen Display (OSD)
- Chapter 4
- Appendix A
- Appendix B
- Regulatory Information
- Appendix C
- Warranty
- Index
- Guide d’utilisation
- GARANTIE
- Index
- Gebrauchsanweisung
Index-37
A
About the Product, 1
About Touchmonitor Adjustments, 11
AccuTouch Touchmonitor Specifications, 30
AccuTouch Touchscreens, 21
Ambient Temperature, 28
B
Brightness, 15
C
Care and Handling of Your Touchmonitor, 24
Chemical Resistance, 29, 30
Color Control, 15
Connecting Your Touchmonitor, 5
Construction, 30
Contrast, 15
CRT Life, 28
D
Deflection Frequency, 27
Display Area, 27
Display Colors, 27
E
Electrical Safety Information, 25
Electrostatic Protection, 29
EMI, 28
Emissions and Immunity Information, 25
Ergonomics, 28
Expected Life Performance, 29, 30
G
Getting Started, 4
Gloss, 29, 30
H
Haze, 30
Horizontal Moire, 14
Horizontal Position, 14
Horizontal Size, 14
Humidity, 28
I
Information, 15
Input Signal, 27
Input Voltage, 27
Installing the Base, 4
Installing the Driver Software, 8
Installing the Serial Touch Driver for Windows 2000, Me,
95/98 and NT 4.0, 9
Installing the USB Touch Driver for Windows 2000,
Windows Me and Windows 98, 9
IntelliTouch Touchmonitor Specifications, 28
IntelliTouch Touchscreens, 20
L
Language, 14
Light Transmission, 29, 30
M
Maximum Resolution, 27
Maximum Video Input Bandwidth, 27
Monitor Dimensions, 28
Monitor Warning Messages, 18
N
Net Weight, 28
O
On-Screen Adjustments, 28
Operation, 11
OSD Adjustments, 14
OSD Horizontal Position, 14
OSD Vertical Position, 14
P
Parallel, 14
Picture Tube, 27
Pin Balance, 14
Pincushion, 14
Plug and Play Compatibility, 27
Positional Accuracy, 29, 30
Power Consumption, 27, 32
Power Management, 27
Precautions, 1
Preset Modes, 32
Preset Timing Table, 33
R
Recall, 15
INDEX