User guide
Table Of Contents
- User Guide
- Chapter 1
- Chapter 2
- Unpacking Your Touchmonitor
- Getting Started
- Connecting Your Touchmonitor
- Important:
- 1 Connect the video cable to the video connector on your PC. Secure the cable to your PC by turni...
- 2 Connect the power cable to the AC connector on your touchmonitor. To protect your equipment aga...
- 3 Connect the touchscreen cable. Determine if you have RS-232 or USB. Connect one end to the appr...
- 4 Power on your monitor using the Soft power switch and check that the power LED is on, then powe...
- 5 After a brief pause the picture should appear. If necessary, adjust the front panel controls ac...
- 6 Insert the Elo TouchTools CD-ROM in your computer’s CD-ROM drive to install the appropriate tou...
- Important:
- Installing the Driver Software
- Installing the Serial Touch Driver for Windows 2000, Me, 95/98 and NT 4.0
- Note:
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Installing the USB Touch Driver for Windows 2000, Windows Me and Windows 98
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next.
- 3 When a list of search locations is displayed, place a checkmark on “Specify a location” and use...
- 4 Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose Next ag...
- 5 You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.
- Note
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the ...
- 3 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Chapter 3
- About Touchmonitor Adjustments
- Touchmonitor Controls
- Using the On Screen Display (OSD)
- 1 Push the MENU button to access the OSD. The resolution and frequency are displayed at the top o...
- 2 Push the or button to choose the item you want to adjust. The selected item is highlighted.
- 3 Push the SELECT button to adjust the highlighted item.
- 4 Push the or button to adjust the selection.
- 5 Push the SELECT button to return to the previous menu if you are in a submenu.
- Brightness
- Contrast
- OSD Adjustments
- Note:
- Using the On Screen Display (OSD)
- Chapter 4
- Appendix A
- Appendix B
- Regulatory Information
- Appendix C
- Warranty
- Index
- Guide d’utilisation
- GARANTIE
- Index
- Gebrauchsanweisung
Index-41
A
Abdichtung, 31
Ablenkfrequenz, 29
Abrufen, 17
AccuTouch-Tastbildschirme, 22
Anschließen des Touchmonitors, 5
Anzeigebereich, 29
Anzeigefarben, 29
Aufbau, 32
Auspacken des Touchmonitors, 3
Auswahl eines geeigneten Standortes, 4
B
Bedienelemente des Touchmonitors, 14
Betrieb, 13
Betriebsfertig, 29
Bildröhre, 29
Bildschirmeinstellungen, 30
C
Chemische Beständigkeit, 31, 32
D
Drehung, 16
E
Einführung, 1
Eingangssignal, 29
Eingangsspannung, 29
Einstellung der Bildschirmanzeige, 16
Elektrostatischer Schutz, 31
EMB, 30
Ergonomie, 30
Erste Schritte, 4
F
Farbanpassung, 17
Fehlerbehebung, 19
Feuchtigkeit, 30
G
Garantie, 39
Glanz, 31, 32
H
H. Größe, 16
H. Moiré,16
H. Position, 16
H. Position Bildschirmanzeige, 17
Helligkeit, 18
I
Informationen zu Vorschriften, 25
Informationen zur elektrotechnischen Sicherheit, 25
Informationen zur Störaussendung und Störfestigkeit, 25
Infos, 17
Installation, 3
Installation der Treibersoftware, 9
Installation des seriellen Tastbildschirmtreibers für
Windows 2000, Me, 95/98 und NT 4.0, 10
Installation des Sockels, 4
Installation des USB-Tastbildschirmtreibers für Windows
2000, Windows Me und Windows 98, 10
IntelliTouch-Tastbildschirme, 22
K
Kissenabgleichung, 16
Kissenverzeichnung, 16
Kontrast, 18
L
Lagegenauigkeit, 31, 32
Langauge, 16
Lebensdauer, 31, 32
Lebensdauer des Bildschirmgeräts, 30
Lichtdurchlässigkeit, 31, 32
Lösung häufiger Probleme, 19
M
Maximale Auflösung, 29
Maximale Videoeingangsbandbreite, 29
Monitormaße, 30
Monitor-Warnmeldungen, 20
N
Nettogewicht, 30
O
Oberflächenhaltbarkeit, 31, 32
Optische Auflösung, 32
Index