User guide
Table Of Contents
- User Guide
- Chapter 1
- Chapter 2
- Unpacking Your Touchmonitor
- Getting Started
- Connecting Your Touchmonitor
- Important:
- 1 Connect the video cable to the video connector on your PC. Secure the cable to your PC by turni...
- 2 Connect the power cable to the AC connector on your touchmonitor. To protect your equipment aga...
- 3 Connect the touchscreen cable. Determine if you have RS-232 or USB. Connect one end to the appr...
- 4 Power on your monitor using the Soft power switch and check that the power LED is on, then powe...
- 5 After a brief pause the picture should appear. If necessary, adjust the front panel controls ac...
- 6 Insert the Elo TouchTools CD-ROM in your computer’s CD-ROM drive to install the appropriate tou...
- Important:
- Installing the Driver Software
- Installing the Serial Touch Driver for Windows 2000, Me, 95/98 and NT 4.0
- Note:
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Installing the USB Touch Driver for Windows 2000, Windows Me and Windows 98
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next.
- 3 When a list of search locations is displayed, place a checkmark on “Specify a location” and use...
- 4 Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose Next ag...
- 5 You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.
- Note
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the ...
- 3 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Chapter 3
- About Touchmonitor Adjustments
- Touchmonitor Controls
- Using the On Screen Display (OSD)
- 1 Push the MENU button to access the OSD. The resolution and frequency are displayed at the top o...
- 2 Push the or button to choose the item you want to adjust. The selected item is highlighted.
- 3 Push the SELECT button to adjust the highlighted item.
- 4 Push the or button to adjust the selection.
- 5 Push the SELECT button to return to the previous menu if you are in a submenu.
- Brightness
- Contrast
- OSD Adjustments
- Note:
- Using the On Screen Display (OSD)
- Chapter 4
- Appendix A
- Appendix B
- Regulatory Information
- Appendix C
- Warranty
- Index
- Guide d’utilisation
- GARANTIE
- Index
- Gebrauchsanweisung
39
C
HAPTER
4
G
ARANTIE
Sofern in diesem Dokument oder in einer anderen dem Käufer übermittelten
Erklärung nichts Anderslautendes enthalten ist, garantiert der Verkäufer dem
Käufer, daß das Produkt keine Material- oder Fabrikationsfehler- aufweist. Siehe
Datenblatt für Touchmonitore.
Der Verkäufer gibt im Zusammenhang mit der Lebensdauer von Monitoren
keine Garantie ab. Die Lieferanten des Verkäufers sind jederzeit bzw. von Zeit
zu Zeit berechtigt, an den als Produkte oder Komponenten gelieferten
Monitoren Änderungen vorzunehmen.
Der Käufer setzt den Verkäufer umgehend (spätestens dreißig [30] Tage nach
Feststellung eines Mangels) in schriftlicher Form von einem etwaigen
Produktmangel gemäß der obigen Garantie in Kenntnis und beschreibt die
Symptome im Zusammenhang mit dem Mangel möglichst detailliert. Außerdem
ermöglicht es der Käufer dem Verkäufer, die installierten Produkte zu
überprüfen, sofern dies möglich ist. Der Verkäufer muß die entsprechende
Mitteilung innerhalb der Garantiezeit für das jeweilige Produkt erhalten, sofern
der Verkäufer nicht in schriftlicher Form anderweitige Instruktionen erteilt. Der
Käufer schickt das angeblich defekte Produkt innerhalb von dreißig (30) Tagen
nach Benachrichtigung des Verkäufers in der Originalverpackung oder in einer
gleichwertigen Verpackung auf eigene Kosten und eigenes Risiko an den
Verkäufer.
Der Verkäufer ist verpflichtet, den Defekt innerhalb einer angemessenen Zeit
nach Erhalt des angeblich defekten Produkts und nach erfolgter Verifizierung,
daß das Produkt die obige Garantie nicht erfüllt, nach eigenem Ermessen durch
(i) Ändern bzw. Reparieren des Produkts oder (ii) Ersetzen des Produkts zu
beheben. Die Vornahme der erforderlichen Änderungen, die Reparatur oder der
Ersatz und die Rücksendung des Produkts an den Käufer einschließlich
Mindestversicherung gehen auf Kosten des Verkäufers. Der Käufer trägt das
Risiko eines etwaigen Verlusts oder einer Beschädigung des Produkts beim
Transport und kann das Produkt versichern. Wenn ein Produkt zurückgeschickt
wird und der Verkäufer keinen Defekt feststellen kann, werden dem Verkäufer
die dadurch entstandenen Transportkosten vom Käufer rückerstattet. Der
Verkäufer entscheidet, ob die Änderung oder Reparatur des Produkts im Werk
des Verkäufers oder vor Ort beim Käufer erfolgt. Wenn der Verkäufer nicht in
der Lage ist, das Produkt gemäß der obigen Garantie zu ändern, zu reparieren
oder zu ersetzen, kann der Verkäufer dem Käufer den Kaufpreis des Produkts
abzüglich der anhand der vom Verkäufer festgelegten Garantiezeit berechneten
linearen Wertminderung nach eigenem Ermessen rückerstatten oder dem Konto
des Käufers gutschreiben.