User guide
Table Of Contents
- User Guide
- Chapter 1
- Chapter 2
- Unpacking Your Touchmonitor
- Getting Started
- Connecting Your Touchmonitor
- Important:
- 1 Connect the video cable to the video connector on your PC. Secure the cable to your PC by turni...
- 2 Connect the power cable to the AC connector on your touchmonitor. To protect your equipment aga...
- 3 Connect the touchscreen cable. Determine if you have RS-232 or USB. Connect one end to the appr...
- 4 Power on your monitor using the Soft power switch and check that the power LED is on, then powe...
- 5 After a brief pause the picture should appear. If necessary, adjust the front panel controls ac...
- 6 Insert the Elo TouchTools CD-ROM in your computer’s CD-ROM drive to install the appropriate tou...
- Important:
- Installing the Driver Software
- Installing the Serial Touch Driver for Windows 2000, Me, 95/98 and NT 4.0
- Note:
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Installing the USB Touch Driver for Windows 2000, Windows Me and Windows 98
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 Choose Next. Select “Search for the best driver for your device (Recommended)” and choose Next.
- 3 When a list of search locations is displayed, place a checkmark on “Specify a location” and use...
- 4 Choose Next. Once the Elo TouchSystems USB touchscreen driver has been detected, choose Next ag...
- 5 You will see several files being copied. Insert your Windows 98 CD if prompted. Choose Finish.
- Note
- 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive.
- 2 If the AutoStart feature for your CD-ROM drive is active, the system automatically detects the ...
- 3 Follow the directions on the screen to complete the driver setup for your version of Windows.
- 1 Click Start > Run.
- 2 Click the Browse button to locate the EloCd.exe program on the CD-ROM.
- 3 Click Open, then OK to run EloCd.exe.
- 4 Follow the directions on the screen to complete the driver setup for your version of Windows.
- Chapter 3
- About Touchmonitor Adjustments
- Touchmonitor Controls
- Using the On Screen Display (OSD)
- 1 Push the MENU button to access the OSD. The resolution and frequency are displayed at the top o...
- 2 Push the or button to choose the item you want to adjust. The selected item is highlighted.
- 3 Push the SELECT button to adjust the highlighted item.
- 4 Push the or button to adjust the selection.
- 5 Push the SELECT button to return to the previous menu if you are in a submenu.
- Brightness
- Contrast
- OSD Adjustments
- Note:
- Using the On Screen Display (OSD)
- Chapter 4
- Appendix A
- Appendix B
- Regulatory Information
- Appendix C
- Warranty
- Index
- Guide d’utilisation
- GARANTIE
- Index
- Gebrauchsanweisung

C-30 Elo Entuitive Touchmonitor Gebrauchsanweisung
17-Zoll-Monitor 15-Zoll-Monitor
Lebensdauer des
Bildschirmgeräts
Die durchschnittliche Lebensdauer des
Bildschirmgeräts beträgt 12.000
Stunden (halbe Helligkeit)
Die durchschnittliche Lebensdauer
des Bildschirmgeräts beträgt 12.000
Stunden (halbe Helligkeit)
Bildschirmeinstellungen
H./V. POSITION, H./V. GRÖSSE,
KISSENVERZEICHNUNG,
TRAPEZOID, PARALLEL,
KISSENABGLEICHUNG,
H./V. MOIRÉ, SPRACHEN,
DREHUNG, H./V. POSITION
BILDSCHIRMANZEIGE,
FARBANPASSUNG, ABRUFEN,
INFOS, ENTMAGNETISIERUNG,
HELLIGKEIT, KONTRAST
H./V. POSITION, H./V. GRÖSSE,
KISSENVERZEICHNUNG,
TRAPEZOID, PARALLEL,
KISSENABGLEICHUNG,
H./V. MOIRÉ, SPRACHEN,
DREHUNG, H./V. POSITION
BILDSCHIRMANZEIGE,
FARBANPASSUNG, ABRUFEN,
INFOS, ENTMAGNETISIERUNG,
HELLIGKEIT, KONTRAST
Sicherheitsvorschriften
UL, cUL, DHHS, TÜVGS UL, cUL, DHHS, TÜVGS
EMB
TCO95, FCC Klasse B, (FCC Klasse A
für Modelle ohne Taststeuerung), CE
FCC Klasse B, (FCC Klasse A für
Modelle ohne Taststeuerung), CE,
TCO95
Ergonomie
ZH1/618:10.80; DIN EN 2941-3:1993
ISO/DIS 9241-7,-8:1986; entspiegelte
Bildschirme: Teil 7, Klasse 1.
Nicht entspiegelte Bildschirme: Teil 7,
Klasse 3.
ZH1/618:10.80; DIN EN 2941-3:1993
ISO/DIS 9241-7,-8:1986; entspiegelte
Bildschirme: Teil 7, Klasse 1.
Nicht entspiegelte Bildschirme: Teil
7, Klasse 3.
Monitormaße
404 mm (B) x 408 mm (H) x 420 mm
(T)
360 mm (B) x 377mm (H) x 392mm
(T)
Nettogewicht (ohne
Tastbildschirm)
13,7 kg unverpackt, 16,7 kg verpackt 11,7 kg unverpackt, 13,5 kg verpackt
Umgebungstemperatur
Betrieb: 0° C - 40° C
Lagerung: -20° C - 65° C
Betrieb: 0° C - 40° C
Lagerung: -20° C - 65° C
Feuchtigkeit
Betrieb: 20 % - 95 %
Lagerung: 10 % - 95 %
Betrieb: 20 % - 95 %
Lagerung: 10 % - 95 %
* Je nach verwendeter Videosteuerung/-karte.