User Guide

2-17

STEP 5-Connecting the Power Cable

Depending on where you live, you will use either the European or US/Canadian

power cable.

• Connect the female end of the power cable into the power port on the

touchmonitor.

• Route the cable through the cable management clip.

OTE

To protect your equipment against risk of damage from electrical surges in the power

line, plug the touchmonitor’s power cord into a surge protector, and then connect the

surge protector to a grounded AC electrical outlet.

STEP 6-Replacing the Back Cover

When all the cables have been connected:

• Put the back stand cover on.

• Power on your PC then your touchmonitor. After a brief pause the picture

should appear.

Connections on underside

Power cable