User Guide

MagTek Device Drivers for Windows
172
PORT-POWERED RS-232 INSERTION READER
File Name
MTPPINSR.VXD
Part Number
30037339
Friendly Name(s)
Port-powered insert reader
Remarks
If events_on is enabled, the driver will send /event 1 M when the card is
inserted. It is suggested that events be disabled (/set events_on 0) before
the data is read to prevent the removal event from being included at the end of card
data. If a card has already been inserted when the driver is opened, there will not be
any notification when events_on is enabled. Consequently, it is recommended
that /get card_stat be issued immediately after opening the driver to see if a
card is blocking the sensor.
Commands Supported
/cancel cmd
✔
✔✔
✔
/load_key n key
/reset ✔
✔✔
✔
/display [x]
/rawrecv ✔
✔✔
✔
/set prop val
✔
✔✔
✔
/echo string
✔
✔✔
✔
/rawsend x
✔
✔✔
✔ /ver ✔
✔✔
✔
/event n data
✔
✔✔
✔
/rawxact x
✔
✔✔
✔
/write data
/get prop
✔
✔✔
✔
/read [[x] y]
✔
✔✔
✔
Properties Supported
Property Yes Default Property Yes Default Property Yes Default
account_no chk_mod10 msg3
amount chk_number msg4
applied_fmt ✔
✔✔
✔ chk_routing offline_enc
c_card_stat ✔
✔✔
✔
1
chk_status oper_tout
c_cardwpin chk_transit pin_blk_fmt
c_check
0
cmd_pending pinfilldig
c_events ✔
✔✔
✔
1
dblpinentry port_name ✔
✔✔
✔
c_keypress dev_status ✔
✔✔
✔ pwroffdelay
c_keystring dev_version ✔
✔✔
✔ s_down_tout
c_magnetic ✔
✔✔
✔
1
enable_cmc7 track1ss ✔
✔✔
✔
c_mechanics
0
enc_key track2ss ✔
✔✔
✔
c_pin enc_key_sn track3ss ✔
✔✔
✔
c_smart
0
enc_mode trivpinchk
c_tracks ✔
✔✔
✔
110
entry_echo trk_enable ✔
✔✔
✔
110
c_write
0
entry_len
trk1data
✔
✔✔
✔
c_wr_secure entry_tout
trk2data
✔
✔✔
✔
capitalize ✔
✔✔
✔
1
events_on ✔
✔✔
✔
0
trk3data
✔
✔✔
✔
card_stat ✔
✔✔
✔ invalcmdrsp ✔
✔✔
✔
0
visa_mac1
chk_account key_parity visa_mac2
chk_amount lasterr ✔
✔✔
✔ visa_mac3
chk_bankid max_pin_len wr_coer
chk_data msg1 wr_secure
chk_format msg2 xact_type
* = Depends on setting in the device.