User manual

STEP 1-Connecting the Video Cable
or 29-pin DVI-I cable
• Connect the 15-pin video cable (the ferrite bead end)
to the video port on your PC.
• Connect the other end of the video cable to the video connector on your
touchmonitor.
• Secure the cable to your touchmonitor and PC by turning the screws on the
connector clockwise.
ET1749L shown (ET1746Ldoes not have DVI-I connector)
FEMALE 15-PIN SERIAL
VIDEO CONNECTOR
VIDEO CABLE
VIDEO PORT
2-8 Elo Entuitive Touchmonitor User Guide