Specifications

Aegis – Series
31
7. Fit the VFD Customer Display onto the VFD Mounting Coupler.
8. Plug the DB9F connector of the VFD Signal Cable to a COM port on the
computer.
9a. For powering from the computer.
a. Plug the 3 pin connector of VFD Power Cable to one of the connector
on the Power Bracket.
b. Plug the other end of the VFD Power Cable to the DC Jack on the
DB9F connector of the VFD Signal Cable.
9b. For powering using an external AC adapter.
a. Plug the DC plug from the AC adapter to the DC Jack on the DB9F
connector of the VFD Signal Cable.
b. It is Important that only an AC adapter made specifically for this VFD
Customer Display is used. Other AC adapters, even with the same
DC Plug, if used may cause damage to the Customer Display and,
possibly, the computer as well.