Specifications

Aegis – Series
25
MCR Parameter Modification
This option is for users who need to customize the MCR parameters for a
particular task.
Some of the useful parameters include:
The selection of country code, other than the default English.
The choice of track combinations.
The preamble/postamble codes.
The MCR parameters can be modified by using the supplied utility program.
The utility can be found on the CD that came with your system in the “Utilities”
folder. The program name is msr_v12_win.zip.
If you are upgrading and earlier system to include our MCR reader, then this
utility can be located on our website at
http://www.firich.com.tw/tech_drivers.htm in the section labelled as “MSR
Utility”.
Unzip this file onto your system hard disk, in a folder of your choice.
It will also create 3 subfolders named Disk1, Disk2, and Disk3.
Change to the folder “Disk1” and run the “Setup.exe” program, and follow the
simple onscreen instructions.
When the installation finishes, you will find that a new folder has been created
in your “Program files” folder, labelled as “Decoder” with a subfolder named
“S64 Decoder”
Now change folder to C:\Program Files\Decoder\S64 Decoder and run the
program named “S64_cfg.exe”
When the program has loaded please select the Magnic_Reader menu item
as in the following picture. By using the 3 top items listed; Interface,
Communication, and Miscellaneous, you will be able to alter many of the
parameters associated with the MCR unit.
When you have finished your modifications and are sure that they are set
exactly how you want them to be, just click on the menu item Transmit to
download the new parameter to the MCR unit. Please refer to the Help menu
for any further assistance.