Specifications

Aegis – Series

INSTALLATION

Model A152TA / A12xTA

This model uses a standard VGA interface.

1. Turn off the computer.

2. Put the Aegis on a steady surface.

3. Please refer to Power Adapter section for instruction on using an external

power adapter and skip this step.

For powering from the computer through the Power Bracket:

a. Open the computer case.

b. Secure the Power Bracket to an unused expansion slot bracket

location.

c. Connect the connector on the Power Bracket wire assembly to a

matching one from computer power supply.

d. Close the computer case.

e. Connect the Aegis Power Cable to the connector on the

Power Bracket.

4. Connect the VGA Cable to the VGA port on the computer.

5. For the unit with touch screen function, please connect the Cable and

DSUB9 Connector to a COM port (RS-232C port) on the computer. Please

note which port number it is connected to, this information is required for

touch driver installation.

6. For units with MCR (magnetic card reader) option. Connect the KB

Cable to the PS/2 keyboard port on the computer. If a keyboard is to be

used, plug the connector from your keyboard into the spare female KB

Connector on the Aegis Keyboard Cable.