Aegis Series
Aegis – Series TABLE OF CONTENTS Features 3 Specifications 4 Physical Diagrams 5 What comes with Aegis 7 Switch and Controls 8 OSD Settings 9 Installation 19 External Power Adapter 21 MCR Installation 22 MCR Parameter Modification 25 VFD Customer Display Installation 27 Trouble Shooting 32 1
Aegis – Series The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
Aegis – Series FEATURES ¾ Cast aluminium front and base construction - rugged and durable ¾ Compact size and small footprint - fits where space is at a premium ¾ Standard VGA for easy interface to a standard PC VGA port.
Aegis – Series SPECIFICATIONS Model A152TA A121TA A122TA TFT LCD TFT LCD TFT LCD Display Area 15.00” 12.1” 12.1” Display Resolution 1024 x 768 XGA 800X600 800X600 Colour Resolution 262,144 16.7M 16.7M Pixel Pitch 0.297x 0.297 0.306X0.306 0.306X0.
Aegis – Series PHYSICAL DIAGRAMS A12xTA A152TA 5
Aegis – Series 6
Aegis – Series WHAT COMES WITH AEGIS Upon unpacking, please inspect to make sure all items are in place and in good condition. If there is any damaged or missing item, please contact your dealer immediately. The following items come as standard 1. LCD Display unit with tilt base 2. Power bracket 3. DC power cable 9000XC1594 4. User’s manual 5.
Aegis – Series SWITCH AND CONTROLS Model A152TA / A12xTA has built-in OSD (on screen display) controls to adjust various display parameters. The control buttons are located on the bottom of the back cover.
Aegis – Series OSD SETTINGS There are four buttons on OSD panel: Menu / Enter, Right, Left and LCD ON/OFF. The functions of these four buttons are as follows Menu/Enter Button Press it to open OSD window and enter user mode to do the function adjustment or selection of the item. It may have many levels in one item. As you select this kind of item, you will enter the next level and see the sub-items.
Aegis – Series OSD Menu Structure Main Menu If push the “ MENU” key the screen will appear this main menu page, you can use the “UP” or “ADJ. +” AND “Down” or “ADJ. –“ key ( appear Pic1 ) to select the function you need. Pic1 The end of this page will be shown the working resolution and frequency. A.Auto Ad jus t If select this function on OSD MAIN MENU and push the MENU key. ( appear Pic2 ) In this function, that will be activated the auto adjusting for the picture.
Aegis – Series B..BRIGHTNESS If select BRIGHTNESS function on OSD MAIN MENU and push the MENU key. ( appear Pic3 ) You can push ADJ+ or ADJ- key to increase or decrease backlight current of the inverter. Pic3 C. CONTRAST If select CONTRAST function on OSD MAIN MENU and push the MENU key. ( appear Pic4 ) You can push ADJ+ or ADJ- key to increase or decrease video gain of the picture.
Aegis – Series D. Screen Settings If select DISPLAY ADJUST function on OSD MAIN MENU and push the MENU key. In this mode, that will into the sub-page ( appear Pic5 ) to adjust display’s function of the picture. Pic5 D-1 H-POSTION In this function, than could adjust the picture in horizontal position. D-2 V-POSITION In this function, than could adjust the picture in vertical position.
Aegis – Series D-3 CLOCK In this function, than could adjust the clock frequency of the picture. D-4 PHASE In this function, than could adjust the clock phase of the picture. D-5 QUALITY In this function, than could adjust the scanning filter of the picture. E. COLOR TEMPERATURE If You select COLOR TEMPERTURE function on OSD MAIN MENU and push the MENU key.
Aegis – Series color of the picture Pic 6 E-1 : 9300K : In this mode , than could recall the value for the color temperature of 9300K. E-2 : 7500K : In this mode , than could recall the value for the color temperature of 7500K. E-3 : 6500K : In this mode , than could recall the value for the color temperature of 6500K. E-4 : AUTO GAIN : In this mode , than could active the auto white balance adjusting. E-5 RED In this function, than could adjust the red gain in user’s mode of color temperature.
Aegis – Series E-6 GREEN In this function, than could adjust the green gain in user’s mode of color temperature. E-7 BLUE In this function, than could adjust the blue gain in user’s mode of color temperature. F. LANGUAGE In this mode, that could into the sub-page ( Pic7 ) to select the language for display.
Aegis – Series Pic 7 G.OSD DISPLAY If select OSD DISPLAY function on OSD MAIN MENU and push the MENU key. this function will into the sub-page ( Pic8 ) to adjust the display’s function for OSD. Pic8 G-1 : OSD H-POS In this function, than could adjust the horizontal position of OSD display.
Aegis – Series G-2 OSD V-POS In this function, than could adjust the vertical position of OSD display. G-3 OSD TIMER In this function, than could adjust the time of OSD display. Except “0” is always display.
Aegis – Series G-4 OSD TRANSPARENCY In this function, than could adjust the transparency of OSD display H. VGA / DVI INPUT If select VGA/DVI function on OSD MAIN MENU and push the MENU key. In this function, that will into the sub-page ( appear Pic9 ) to select input source. Pic9 H-1 : ANALOG INPUT : In this mode , than could select the input source from the VGA. H-1 : DIGITAL INPUT : In this mode , than could select the input source from the DVI.
Aegis – Series INSTALLATION Model A152TA / A12xTA This model uses a standard VGA interface. 1. Turn off the computer. 2. Put the Aegis on a steady surface. 3. Please refer to Power Adapter section for instruction on using an external power adapter and skip this step. For powering from the computer through the Power Bracket: a. Open the computer case. b. Secure the Power Bracket to an unused expansion slot bracket location. c.
Aegis – Series 20
Aegis – Series EXTERNAL POWER ADAPTER For situation where the Power Bracket cannot be used to power the Aegis, an optional External Power Adapter can be used instead. 1. Check the items in the External Power Adapter kit, including a power adapter and an AC cord. 2. Turn off power to the computer and turn the Aegis power switch to off. 3. Plug one of the Power Adapter plug to the Aegis Power Connector. 4. Connect the AC plug of the Power Adapter to an AC outlet.
Aegis – Series MCR INSTALLATION The MCR (magnetic card reader) option can be fitted to the right side of Aegis. This option allows the reading of magnetic stripe card through keyboard input. * If there is a need to modify the MCR parameters, such as country code and track combination, please follow the instruction in the section, MCR Parameter Modification.
Aegis – Series 1. Check the items in the MCR option kit. 2. Turn off Power to the Aegis and the computer. 3. Unplug the loopback from the MCR socket.
Aegis – Series 4. Attach the MCR Assembly to the main unit and connect the MCR cable to the MCR socket. 5. Secure the MCR to the main unit with 2 screws. 6. Turn on Aegis power. 7. Put the back cover on Aegis and secure with screws. * If the MCR is taken off, the loopback plug must be re-inserted. Otherwise, the keyboard would not function.
Aegis – Series MCR Parameter Modification This option is for users who need to customize the MCR parameters for a particular task. Some of the useful parameters include: The selection of country code, other than the default English. The choice of track combinations. The preamble/postamble codes. The MCR parameters can be modified by using the supplied utility program. The utility can be found on the CD that came with your system in the “Utilities” folder. The program name is msr_v12_win.zip.
Aegis – Series MCR Utility Reader 26
Aegis – Series VFD CUSTOMER DISPLAY INSTALLATION 1. Check the items in the VFD Customer Display Kit.
Aegis – Series 2. Turn off power to Aegis and the computer. 3. Remove the VFD Mounting Cover from the Base of Aegis.
Aegis – Series 4. Secure the VFD Mounting Coupler to the Base with three VFD Mounting Screws.
Aegis – Series 5. Thread the RJ-45 phone connector of the VFD Signal Cable through the VFD Mounting Coupler, from the bottom of Aegis. 6. Plug the RJ-45 connector to the VFD Customer Display.
Aegis – Series 7. Fit the VFD Customer Display onto the VFD Mounting Coupler. 8. Plug the DB9F connector of the VFD Signal Cable to a COM port on the computer. 9a. For powering from the computer. a. Plug the 3 pin connector of VFD Power Cable to one of the connector on the Power Bracket. b. Plug the other end of the VFD Power Cable to the DC Jack on the DB9F connector of the VFD Signal Cable. 9b. For powering using an external AC adapter. a.
Aegis – Series TROUBLE SHOOTING When encountering difficulties in using this product, please follow the steps below. If the problem persists, please contact the dealer. 1. No picture on screen a. Check the AC cord and signal cable. Make sure they are properly connected. b. Check that the power button on the OSD panel is turned on. c. Check if the computer has entered energy saving mode. 2. Abnormal display colour a. Check if the signal cable is properly connected to the computer. b.
