Specifications

SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A
47
6.2.2.9 Paging Tone Calculator Dialog Box
The Configuration Editor’s Tone Calculator dialog box, shown selected in the following figure, is a built-in tone
frequency calculator which supports standard paging tone formats which transmit two sequential tones. Upon entering a valid
paging code plan number (3 digits) via the dialog box’s numeric keypad, the calculator will display the respective tone
frequencies (in Hz) of the two sequential tones. This calculator is included to ease radio programming during side-by-side
radio personality programming operations. It is also beneficial during side-by-side programming of an external paging tone
decoder. Unlike most other Configuration Editor dialog boxes, using this calculator does not affect the console application
in any way; it does not modify any of the console’s INI files.
Figure 6-16 — Configuration Editor’s Paging Tone Calculator Dialog Box
Operate the paging tone calculator as follows:
1. From the Code Plan drop-down list box, select the desired paging code plan.
2. Enter the paging code number by clicking the respective digits on the numeric pad.
If an invalid paging code is entered for the selected code plan, the calculator will display both tone frequencies as
“0.0” Hz. In this case, click the <Clear> button and repeat code entry as necessary.
3. Read the paging code’s first and second tone frequencies (in Hz) in the corresponding dialog boxes.
4. For another tone calculation, click the <Clear> button and repeat the above procedure.