Specifications

AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION
42
6.2.2.7 Preprogrammed Paging Control Buttons Dialog Box
Like the console’s three (3) manual paging control buttons on its Manual Paging dialog box, the Configuration Editor
also provides button text label edit functions for the six (6) preprogrammed paging control buttons the console’s
Preprogrammed Paging dialog box. This configuration is performed via the Configuration Editor’s PreProg Controls dialog
box, shown selected in the following figure. Preprogrammed (automatic) paging is one method of paging via the console’s
integrated paging feature licensed option. Save any changes made by clicking the <Save> command button.
Figure 6-12 — Configuration Editor’s Preprogrammed Paging Control Buttons Dialog Box
NOTE
Since integrated paging is a feature licensed option, configurations described in this section do not guarantee
integrated paging operations will be possible within the console application. Refer to section 6.2.7 in this manual
(page 57) for additional information on the console’s feature licensed options.
6.2.2.7.1 Configuring Preprogrammed Paging Control Buttons
Within the console application, the six (6) control buttons on the Preprogrammed Paging dialog box provide basic
control during preprogrammed paging operations. The <Enter> button starts the paging tone transmissions, the <Selected
TX> button allows PTTing (console-originated voice transmissions) on the simulselect which is created after the paging tone
transmissions complete, the <Clear SS> button clears/deactivates the simulselect, the <Esc> (escape) button cancels the
page operation and closes the Preprogrammed Paging dialog box, and the two (2) flip buttons provide selection for the 144
different preprogrammed paging buttons. To edit text labeling on one or more control buttons, follow this procedure:
1. From the PreProg Control dialog box (see Figure 6-12), click the desired control button.
NOTE