Specifications

SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A
41
2. Click within the Label text box and edit the button’s text label using the PC’s keyboard. Since the function of each
of these buttons is hard-coded within the console application, edits should not change the basic indication of
what each button performs.
3. If necessary, edit another control button’s text label by repeating steps 1 and 2.
4. Save the label change(s) by clicking the <Save> command button. All changes are saved in the PAGING.INI file.
Since display of button text labeling within the Configuration Editor does not exactly match the display within the
console application, any button text labeling edits should be viewed within the console application before the changes are
released for dispatch operations.
Within the console application, the six (6) code plan buttons on the Manual Paging (numeric entry) dialog box provide
code plan selection before a page is started. Normally, as shown in Figure 6-11, each button is configured with a different
code plan. Edit the code plan button properties as follows:
1. From the Manual Paging dialog box (see Figure 6-11), click the desired code plan button.
2. Click within the Label text box and edit the button’s text label using the PC’s keyboard. The entered label should,
in most cases, indicate the code plan which the button is set for (see next step).
3. Set the button’s code plan via the Code Plan drop-down list box. The selected code plan should be in union with
the button’s text label, in most cases.
4. If disabling of the button is desired, check the Disable Button check box. If a button is disabled, it is
recommended that its label be edited to indicate the disabled state (repeat step 2 if necessary).
5. If necessary, edit another button’s properties by repeating steps 1 thru 4.
6. Save button property changes by clicking the <Save> command button. All changes are saved in the PAGING.INI
file.