Administrator’s Manual EDACS® C3 MAESTRO™ DISPATCH CONSOLE FOR WINDOWS NT® Ericssonz
AE/LZB 119 1897 R1A CREDITS EDACS is a registered trademark of Ericsson Inc. C3 Maestro is a trademark of Ericsson Inc. Microsoft is a registered trademark of Microsoft Corporation. Windows NT is a registered trademark of Microsoft Corporation. MS-DOS is a registered trademark of Microsoft Corporation. AccuTouch is a trademark of Elo TouchSystems, Inc. Novell and Netware are registered trademarks of Novell, Inc. Pentium is a registered trademark of Intel Corporation.
AE/LZB 119 1897 R1A TABLE OF CONTENTS Page 1. INTRODUCTION....................................................................................................................................... 1.1 RELATED MANUALS ..................................................................................................................... 1.2 ADMINISTRATIVE PERSONNEL QUALIFICATIONS............................................................. 7 7 7 2. HARDWARE OVERVIEW .............................................
AE/LZB 119 1897 R1A TABLE OF CONTENTS Page 6.2 C3 MAESTRO.................................................................................................................................... 6.2.1 Initialization Files....................................................................................................................... 6.2.1.1 MAESTRO.INI................................................................................................................ 6.2.1.2 FIXSTR.INI ........................
AE/LZB 119 1897 R1A TABLE OF CONTENTS Page 6.2.2.10.2 Route All RSM/RTT Messages Enable/Disable.................................................. 6.2.2.11 Entity Database Editor Dialog Box................................................................................ 6.2.2.11.1 Changing Existing Entity Records....................................................................... 6.2.2.11.2 Adding New Entity Records ................................................................................ 6.2.2.11.
AE/LZB 119 1897 R1A (This Page Intentionally Blank) 6
INTRODUCTION AE/LZB 119 1897 R1A 1. INTRODUCTION The intent of this manual is to present both high- and low-level configuration information to the administrative personnel responsible for the EDACS® C3 Maestro™ dispatch console system for the Windows NT® operating system.
AE/LZB 119 1897 R1A HARDWARE OVERVIEW required and a well-developed knowledge of the Windows NT operating system is recommended. Ideally, the administrator should hold or have held a supervisory-type position in a dispatch center and have excellent computer skills. Normally, information in this manual should not be available to or be to the concern of dispatchers using a C3 Maestro console on a dayto-day basis.
HARDWARE OVERVIEW AE/LZB 119 1897 R1A 2.1.1.1 Windows NT Compatibility First and foremost, a PC must be approved for use with Windows NT. Microsoft publishes a list of Windows NTcompatible computers. This listing is available from Microsoft (see Table 1-2). Only approved computers are used by Ericsson for the C3 Maestro console for Windows NT product. These PCs also meet or exceed all minimum hardware specifications listed in section 2.1.1.
AE/LZB 119 1897 R1A HARDWARE OVERVIEW certain area of the screen but the touch may be interpreted as a touch in an area just above the touched area. However, with proper touch-screen calibration (via software) and stable monitor-to-eye-level placement, parallax error can be minimized to an insignificant amount.
SOFTWARE OVERVIEW • an Audio System Board located inside the case • operating firmware which is part of the Audio System Board • accessories such as speakers, headset jack boxes, cables, etc. • 19-inch EIA rack-mount hardware (optional) AE/LZB 119 1897 R1A For complete details on the Enhanced Audio Enclosure and its related audio devices, refer to the respective maintenance manual (see Table 1-1) which is included with the console equipment package. 2.2.
AE/LZB 119 1897 R1A SOFTWARE OVERVIEW 3.2 C3 MAESTRO CONSOLE APPLICATION AND UDS CONFIGURATOR PROGRAM The C3 Maestro console application and its User-Definable Screen (UDS) Configurator program are composed of many different software program files, initialization (configuration) files, database files, etc. These two software applications are distributed and installed separately as described later in this manual.
SOFTWARE OVERVIEW AE/LZB 119 1897 R1A Table 3-1 — C3 Maestro Dispatch Console For Windows NT Files* (Continued) FILE LOCATION & NAME / ICON DESCRIPTION WHEN CREATED ADDITIONAL NOTES Communications Interface executable program—provides data support to the Dispatch Manager program for the PC-to-CIM serial data link and, non-inclusively, for either This icon only appears in the Windows NT list.
AE/LZB 119 1897 R1A SOFTWARE OVERVIEW Table 3-1 — C3 Maestro Dispatch Console For Windows NT Files* (Continued) FILE LOCATION & NAME / ICON DESCRIPTION WHEN CREATED ADDITIONAL NOTES C:\MAESTRO\STATUS.INI RSM/RTT status code initialization file— stores definitions for all 128 possible RSM/RTT status codes. On a per code basis, it stores if the specific code is set for RSM or RTT use, and the code’s descriptive text string.
SOFTWARE OVERVIEW AE/LZB 119 1897 R1A Table 3-1 — C3 Maestro Dispatch Console For Windows NT Files* (Continued) FILE LOCATION & NAME / ICON DESCRIPTION WHEN CREATED ADDITIONAL NOTES C:\MAESTRO\UDS.EXE UDS Configurator executable program—an At UDS off-line program used to configure most Configurator display attributes such as display items’ software colors, positioning and text string labels. installation See manual AE/LZB 119 1896 for program operation details. C:\MAESTRO\UDS.
AE/LZB 119 1897 R1A HARDWARE INSTALLATION 4. HARDWARE INSTALLATION Refer to the maintenance manual included with the console equipment package for console hardware installation instructions. Specific publication numbers are shown in Table 1-1 of this manual. 5. SOFTWARE INSTALLATION 5.1 WINDOWS NT 5.1.1 Software Installation/Re-Installation (if required) Specifically, the C3 Maestro console for Windows NT requires the Workstation version of Windows NT.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A This software installation procedure will create a new common program group within Program Manager (if not already) for the console’s program icons. These icons are shown in Table 3-1. As shown in the table, most files are copied to the C:\MAESTRO directory on hard disk drive. The installation software automatically creates this directory if it does not exist.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION • The computer’s hard disk drive must be partitioned into one (1) contiguous partition. FAT (File Allocation Table) is the recommended file system format. • MS-DOS must be installed on the computer’s hard disk drive before Windows NT. When a dual-boot configured PC is booting up, a small text-based menu appears (in most cases) which allows the user to select which operating system to boot-up with.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A Figure 6-1 — Control Panel’s System Dialog Box (partial) with Startup set to Windows NT Figure 6-2 — Control Panel’s System Dialog Box (partial) with Startup set to MS-DOS 6.1.2 Networking And Feature Licensed Options Configurations Windows NT has many standard network protocols built-in. Examples include NetBEUI (NetBIOS extended user interface), TCP/IP (transmission control protocol/internet protocol), and NWLink (Novell Netware Link).
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION • computer name (for example: IMC32CON03), workgroup name (for example: FIRE_DISP) and domain name (if any) • IP address (for example: 192.168.1.1) and subnet mask (for example: 255.255.255.0) • connection type (for example: 10-base T) Proper network configuration and connection may be verified between two (2) computers/workstations via the PING command from an MS-DOS prompt. The syntax is “PING” followed by a space and the desired IP address.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 6.1.2.3.2 Computer Networked Within a particular computer network (Ethernet), each Windows NT workstation must have a unique “computer name.” Therefore (if the console/computer is networked), its computer name must be changed from the factory default computer name stated above.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.1.4 User Accounts Two (2) Windows NT user accounts are required. These accounts are set-up at the factory and in most cases, no changes are necessary during console set-up if only standard dispatch console operations are necessary. The first user account — “Administrator” — is used only for configuration purposes. The factory-set password for this account is “ADMIN”.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 10. Add the new user to the required user account group(s) by selecting the group(s) in the “Not member of:” list and then clicking the command button. This action adds the selected group(s) to the “Member of:” list. Any user running the console application must have rights to change the system time per a group membership right; if required, see the User Manager program’s User Rights Policy dialog box for each group’s current rights. 11.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION key must be depressed when Windows NT displays its logo. The system will then revert back to manual log-on via the log-on dialog box. 6.1.5.3 Configuring Automatic/Manual Log-On Automatic/Manual log-on configuration may be accomplished via the Configuration Editor program’s Auto Logon dialog box. Refer to section 6.2.2.4 in this manual (page 37) for details. 6.1.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A NOTE NOTE If screen resolution changes are made via the Windows NT Control Panel, the console application’s active screen initialization file may require changes via the UDS Configurator program. This is especially true if the active screen initialization file was set-up for a resolution higher than the new resolution.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION significant change occurs in either the monitor’s level/position or the dispatcher’s eye level/position. For example, recalibration may be required if the dispatcher’s seating is raised significantly. Refer to the touch-screen manufacturer’s documentation and/or on-line help for configuration processes.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 6.2.1.2 FIXSTR.INI FIXSTR.INI stores most general operation and error text strings such as messages displayed in the console’s message panel and the text icons displayed in standard communication modules. Changes via a text editor are not recommended. However, some specialized applications may require minor text changes to this file. If so, the following information must be observed: Some keyword text strings in FIXSTR.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.2.2 Using The “Configuration Editor” Program The C3 Maestro Configuration Editor program (MCONFIG.EXE) is an off-line executable program used to configure many user-customizable settings for the C3 Maestro dispatch console for Windows NT. Here, the term “off-line” designates the requirement of only executing the program when the console application is not running.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A Configuration Editor dialog boxes, using this calculator does not affect the console application in any way; it does not modify any of the console’s INI files. See Figure 6-16. • Radio Status—The Radio Status dialog box allows the user to set-up each of the 128 possible radio statuses as required at the console. Each status code is set for either RSM or RTT operation at the console and its text string is defined.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION Three (3) command buttons are located at the bottom of the Configuration Editor’s window. These buttons are common to all of the program’s dialog boxes and they are always displayed when the program is running. If a command button’s function is not currently valid, it grays-out to indicate this. For example, as shown in Figure 6-4, the command button is grayed-out since the program was just started and no configuration changes have occurred. 6.2.2.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 6.2.2.1.2 CIM Serial Link PC COM Port Number The CIM Port option buttons provide selection for which one of the PC’s serial COM ports is utilized for the serial interfacing with the CIM in the CEC/IMC. The factory default setting is COM3. In most cases, no changes are required to this setting.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.2.2.2 Comm Monitor Dialog Box The Configuration Editor’s Comm Monitor dialog box, shown selected in the following figure, and its associated subdialog boxes provide configuration functions for the Communications Interface program’s (MCOMM.EXE) monitor. Within the monitor, CIM link and audio system link port receive and transmit data messages are displayed in a hexadecimal format.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 6.2.2.2.2 Device Link Displayed At Start-Up The Device option buttons provide selection for which device link is displayed at monitor start-up. Selections include CIM for the PC-to-CIM serial link, EAE for the PC-to-Enhanced Audio Enclosure serial link (if present), and CLB for the PC-to-Console Logic Board PC expansion bus link (if present). CIM is the factory setting.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.2.2.3 Dispatch Manager Dialog Box The Dispatch Manager dialog box, shown selected in the following figure, provides configuration functions for many settings which directly affect how the Dispatch Manager program (CONSOLE.EXE) controls the other items. For example, from this dialog box the user may enable/disable several console application start-up options which the Dispatch Manager controls. Each setting is described in the following subsections.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A NOTE NOTE Typically, API message logging is only required during troubleshooting/diagnostic purposes. As the size of the log file can become excessive during extended console operational periods, logging should either be disabled prior to console start-up (recommended) or disabled via menu selection within the Dispatch Manager soon after the console is started.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.2.2.3.7 Setup Utilized At Console Start-Up The number entered in the Startup Setup text box specifies which one of the ten (10) setups the console will operate with when it is started. These setups correspond to the ten console user profiles established at the CEC/IMC Manager for the console. Each setup also stores its own standard communication module programming.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 6.2.2.4 Auto Logon Dialog Box The Auto Logon dialog box, shown selected in the following figure, provides configuration functions for Windows NT user log-on parameters required for an automatic user log-on sequence during a Windows NT boot-up. Configurable parameters required to complete an automatic log-on include the user’s name, password, and the log-on domain name. Also via this dialog box, automatic log-on may be enabled and disabled.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.2.2.4.3 Log-On User’s Password In the Password text box, enter the log-on user’s password required during the automatic Windows NT log-on sequence (see Figure 6-9). Assuming automatic log-on is enabled, this password will be the password utilized to automatically log-on the user.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A unit ID number assignment is normally accomplished at the CEC/IMC Manager. In rare cases such as when the CEC/IMC Manager is off-line for an extended period, this text box may be utilized, if necessary, to change the console’s unit ID number. Use caution if making changes! The valid range is 1 — 16382.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.2.2.6 Manual Paging Buttons Dialog Box The Manual Paging dialog box, shown selected in the following figure, provides configuration functions for the console’s manual paging buttons. This configuration involves defining each button’s code plan type and text label. Manual paging is one method of paging via the console’s integrated paging feature licensed option. Save any changes made by clicking the command button.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 2. Click within the Label text box and edit the button’s text label using the PC’s keyboard. Since the function of each of these buttons is hard-coded within the console application, edits should not change the basic indication of what each button performs. 3. If necessary, edit another control button’s text label by repeating steps 1 and 2. 4. Save the label change(s) by clicking the command button. All changes are saved in the PAGING.INI file.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.2.2.7 Preprogrammed Paging Control Buttons Dialog Box Like the console’s three (3) manual paging control buttons on its Manual Paging dialog box, the Configuration Editor also provides button text label edit functions for the six (6) preprogrammed paging control buttons the console’s Preprogrammed Paging dialog box. This configuration is performed via the Configuration Editor’s PreProg Controls dialog box, shown selected in the following figure.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 2. Click within the text box and edit the button’s text label using the PC’s keyboard. Since the function of each of these buttons is hard-coded within the console application, edits should not change the basic indication of what each button performs. 3. If necessary, edit another control button’s text label by repeating steps 1 and 2. 4. Save label changes by clicking the command button. All changes are saved in the PAGING.INI file.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION NOTE NOTE Since integrated paging is a feature licensed option, configurations described in this section do not guarantee integrated paging operations will be possible within the console application. Refer to section 6.2.7 in this manual (page 57) for additional information on the console’s feature licensed options. 6.2.2.8.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 6.2.2.8.2 Configuring Preprogrammed Paging Buttons As previously stated, preprogrammed paging button configuration involves defining each button’s properties including the code plan type, specific code number, broadcast entity type & number, and the button text label (alias). The following sample figure shows how the Configuration Editor’s PreProg Paging dialog box appears after several buttons have been configured per a typical dispatch environment.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 7. If disabling of the button is required, check Disable Button by clicking this text box and proceed to step 12 in this procedure. 8. Click one of the three (3) Type option buttons to select the broadcast entity type. 9. In the ID text box, enter the corresponding broadcast entity’s ID number. For example, if the broadcast entity is conventional channel 130 in the CEC/IMC network, enter “130” in the ID text box. 10.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 6.2.2.9 Paging Tone Calculator Dialog Box The Configuration Editor’s Tone Calculator dialog box, shown selected in the following figure, is a built-in tone frequency calculator which supports standard paging tone formats which transmit two sequential tones. Upon entering a valid paging code plan number (3 digits) via the dialog box’s numeric keypad, the calculator will display the respective tone frequencies (in Hz) of the two sequential tones.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.2.2.10 Radio Status Dialog Box The Configuration Editor’s Radio Status dialog box, shown selected in the following figure, provides configuration functions for the console’s radio status code initialization file—STATUS.INI. This INI file is a database for the 128 unique RSM/RTT status codes which the console provides.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A the UDS Configurator program is started for RSM/RTT module additions. To define status codes, perform the following procedure: 1. If desired, exit the Configuration Editor and back-up the existing STATUS.INI file by copying it to a different directory and/or disk, or by copying it to the same disk and directory with a different file name (for example: STATUS.BAK). Next, re-start the Configuration Editor and select the Radio Status dialog box. 2.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.2.2.11 Entity Database Editor Dialog Box The Configuration Editor’s Entity Database dialog box, shown selected in the following figure, provides edit functionality for the console’s locally-stored entity database. The database is stored on the PC’s hard disk drive under the file name ENTITY.DAT in the C:\MAESTRO directory. Unit/Console, group and conventional channel entities’ settings can be changed by editing entity records stored in the database file.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 3. Via one of the Sort option buttons, select the desired sorting method for the entity record listing. If Alias is selected, the listing will display entity records sorted alphabetically by their aliases. If ID is selected, the listing will display entity records sorted numerically by their ID (LID or GID) number. The chosen sorting method always appears in the listing’s far left column. 4.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.2.2.11.5 Finding An Entity Record An entity record may be quickly located via the Entity Database dialog box’s button. To use this feature, simply enter a text string within the text box next to the button and then click the button. The program will search the listed entity records and, if present, a record with a matching text string will automatically select.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A Table 6-3 —Importing DOS-Based Console Data Files FROM DOS CONSOLE: TO WINDOWS NT CONSOLE: FILE NAME (file type) FILE NAME (file type) ENTITY.DAT (binary) ENTITY.DAT (binary) Entity database—Upon importing, a new Windows NT console-formatted ENTITY.DAT file is generated and stored in the C:\MAESTRO directory(*). Source location for the DOS console-formatted ENTITY.DAT file can be either the C:\CONSOLE directory or a floppy disk in drive A. SETUPS.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 2. From Windows NT Program Manager, copy the Dispatch Manager icon to the Startup program group. This Startup program group is created when Windows NT is installed. Perform the copy by opening both the Startup and the C3 Maestro program groups and then, while holding the PC keyboard’s key depressed, click-and-drag the Dispatch Manager icon to the Startup program group. The Dispatch Manager’s icon is shown in Table 3-1. 3.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A program (GUI.EXE). The Communications Interface program’s monitor window may or may not be visible per Configuration Editor configuration; see section 6.2.2.2.3 or section 6.4 for additional details on the monitor. Upon exiting the console application, operation will return to Windows NT Program Manager assuming no window application switching has occurred since the console application started. 6.2.3.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.2.4 Full Screen Enabled Vs. Full Screen Disabled Per a MAESTRO.INI file setting, the C3 Maestro console is configurable for either full screen GUI operation only (the GUI cannot be resized or moved) or windowed GUI operation like a typical Windows application. See the following subsections for additional details on these two settings. Enable/disable full screen GUI operation via the Configuration Editor’s Miscellaneous dialog box (see section 6.2.2.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A • the number of RSM modules on each console module page and each RSM module’s status code number; • the number of RTT modules on each console module page and each RTT module’s status code number; • the exact display position of all standard, RSM and RTT modules; • the presence/absence of static display items such as the page button bar, message panel, VU meter panel and the command panels; • the exact display position of static display items such as the
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION The set-up and administration of feature licenses is beyond the scope of this manual. Refer to EDACS Product Licenses for Windows NT manual AE/LZT 123 1906 and/or the console’s Software Release Notes for additional for details. 6.2.7.1 Auxiliary Input/Output (I/O) Configurations A C3 Maestro console may be utilized to monitor and control CEC/IMC 2-state auxiliary I/O events. CEC/IMC firmware version 4.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 6.2.7.2 Integrated Paging Configurations For the console, all integrated paging configurations are accomplished via one or more of several Configuration Editor dialog boxes. Refer to the following sections in this manual as necessary: • Manual Paging—See section 6.2.2.6 (page 40) for button configuration information and see section 6.2.2.5.4 (page 39) for initial delay timer configuration information. • Preprogrammed (Automatic) Paging—See sections 6.2.2.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION In the console application, the top line of the message panel displays status information for both RSM status and RTT status. 6.2.7.3.2 RTT Basics The RTT option is similar to the RSM option primarily in regards to status code transmission from the radios and general handling throughout the EDACS radio system. At the console however RTT allows the dispatcher to, as desired, individually reply to each unit sending request-to-talk status to dispatch operations.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 4. Copy this master STATUS.INI file to all consoles in the system which require status operations. Refer to Table 3-1 in this manual for the file path. 5. At each console which has the UDS Configurator program installed, add RSM and/or RTT modules to required module pages (edit the console’s active screen initialization file). Refer to the UDS Configurator User’s Manual (AE/LZB 119 1896) for details.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.3 MODEM CONFIGURATIONS 6.3.1 General Information Instead of a direct RS-422 control data link between the C3 Maestro console and the CIM in the CEC/IMC, some applications may require modem-supported control data links.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 6.3.2 U.S. Robotics Courier Modems 6.3.2.1 Dedicated Line Configuration (Typical) The following list is an example of the modem configuration (status register values, etc.) required for each modem in a dedicated line modem link employing U.S. Robotics Courier V.32 bis Turbo modems. Refer to the modem manufacturer’s documentation for additional information such as cable hook-up and DIP switch configuration requirements. Also refer to LBI-33031.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 6.3.2.2 Dial-Up Line Configuration (Typical) As previously stated, dial-up line modem links require manual establishment of the connection. Normally, this is accomplished with the Windows NT Terminal program (TERMINAL.EXE) followed by start-up of the console application. The following list is an example of the modem configuration required for each modem in a dial-up line modem link employing U.S. Robotics Courier V.32 bis Turbo modems.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A 6.3.3 ZyXEL Modems 6.3.3.1 Dedicated Line Configuration (Typical) The following procedure provides basic programming instructions for ZyXEL™ U-1496 series modems when employed in a C3 Maestro console-to-CIM dedicated 4-wire line control data link. These modems are available in desk-top and rackmount versions. ZyXEL modems (and related accessories) are stocked under part numbers 19A149786P6 thru P14.
AE/LZB 119 1897 R1A 4. SOFTWARE CONFIGURATION Access the modem’s ERROR CONTROL submenu and set each of the following options to the required setting: OPTION CONTROL LEVEL FLOW CONTROL NEGOTIA FALLBACK BREAK HANDLING 5. REQUIRED SETTING V.
SOFTWARE CONFIGURATION AE/LZB 119 1897 R1A The Dispatch Manager program always automatically starts the Communications Interface program. When it starts, the monitor may or may not be “visible” per an initialization file setting established via the Configuration Editor’s Comm Monitor dialog box. See section 6.2.2.2 in this manual (page 32) for specific monitor configuration information.
AE/LZB 119 1897 R1A SOFTWARE CONFIGURATION 10. To (re)start the display of data messages, click the button. When running, this button automatically changes to . 11. Use the Options dialog box to change any desired monitor settings such as its window size, enable/disable data logging, enable/disable various data message filters, etc. Open this dialog box by clicking the button. 12. Click the button to make the monitor (and thus the Communications Interface program) invisible.
INDEX AE/LZB 119 1897 R1A 7. INDEX administrative personnel .............................................................7 qualifications ..........................................................................7 Aegis...................................................................See digital voice audio system .............................................................................10 accessories' compatibility .....................................................10 if none .....................
AE/LZB 119 1897 R1A INDEX components .......................................................................... 10 PC COM port ....................................................................... 31 rack-mount ........................................................................... 10 selecting type of audio system.............................................. 31 entities changing existing records..................................................... 50 deleting existing records......................
INDEX touch-screen resolution ..........................................................9 touch-screen, parallax error calibration ................................25 video display ..........................................................................9 video memory.......................................................................24 video subsystem RAM size ....................................................8 video subsystem type..............................................................
AE/LZB 119 1897 R1A INDEX setups changing start-up.................................................................. 36 quick save enable/disable ..................................................... 35 simulselects paging............................................................................. 42, 44 software ........................ See console application or Windows NT speakers .................................................................................... 10 rack-mount .......................
