User guide

Elo TouchSystems 2240L User Guide 17

C H A P T E R

OPERATION

About Touchmonitor Adjustments

Your touchmonitor most likely will not require adjustment. However,

variations in video output and application may require adjustments to

your touchmonitor to optimize the quality of the display.

For best performance, your video source should be 1680 X 1050

resolution, at 60Hz vertical frame rate. Operating in other resolutions

degrades video performance.

For input video outside the refresh rate and dot clock ranges, the

monitor does not automatically adjust, but displays an “Out of Range”

(OOR) message and the On-screen Display (OSD) menu, which ordi-

narily allows you to change monitor settings, is disabled.

Note: If the OOR message is displayed, do not continue to oper-

ate the touchmonitor or LCD damage may result. To enable the

touchmonitor, change the computer video mode so it is within

the allowable vertical frame rate range shown under “Input Video

Range” on page 32.