Specifications

E271-2201 PC-Bus Controller 31
E271-2201 Connections
AccuTouch
The AccuTouch touchscreen typically has a 30 inch cable terminated with a 1x5
female connector. This is normally converted to a DB9 male bulkhead connector
with an adapter cable internal to the display (P/N 012131-K1, included with the
touchscreen kit (P/N E274-XXX-K1). This adapter has built-in transient
protection, and must be connected through a short lead to frame ground. For more
information on transient protection, see Touchscreen Connections, page 28, and
the AccuTouch Product Manual.
An additional external cable (P/N 012143), included with the controller if ordered
as a kit (P/N 002201-K1 or P/N 002202-K1), connects the bulkhead connector to
the DB9 female connector on the controller. See the AccuTouch Product Manual
for cabling kits and options.
The following pinouts apply:
AccuTouch Signal Touchscreen Cable Pin Controller DB9 Pin
H 1 9
X 2 6
S 3 1
Y 4 7
L 5 8
DuraTouch
The DuraTouch touchscreen typically has a short flexible cable with a 1x4 female
connector. This must be converted to a DB9 male connector for connection with
the DB9 female connector on the controller.
The following pinouts apply:
DuraTouch Signal Touchscreen Cable Pin Controller DB9 Pin
XH 1 6
XL 2 7
YL 3 8
YH 4 9