Setup guide

Hook-Up 11
Palette VL Lighting Control Console Installation & Setup Guide
HOOK-UP
1. Connecting Console Components
To connect console components, do the following:
Step 1. At console rear panel, connect power supply (included).
Step 2. Connect monitor or touchscreen (sold separately).
Step 3. Install gooseneck lamps (sold separately).
Step 4. Connect USB mouse and keyboard.
Note: The Palette VL 16 console is shown in the illustration below. Other Palette VL models will vary.
Figure 1: Console Rear Panel
2. DMX512 Output
The console provides two standard XLR 5-pin connectors for connecting to DMX512 devices. Each connector
supports one DMX512 universe of 512 DMX channels. Connect DMX512 devices as shown in Figure 1.
DMX512 Out (XLR-5M)
Power
Audio (2)
USB (2)
Network
Monitor (HDB-15F) Serial (DB-9M)
Power
Monitor
(RJ-45)
(HDB-15F)
Processor
PROCESSOR DETAIL