Setup guide

Installation & Setup Guide Palette VL Lighting Control Console
4 Overview
COMPONENTS
1. Included Items
The Palette VL Lighting Control Console system includes the following items:
• 1 x Console with built-in Trackball and Rotary Encoders
• 3 x Power Cables for all countries
• 1 x USB Mouse
• 1 x USB Keyboard
• 1 x Dust Cover
• 1 x External Power Supply
• 1 x Installation & Setup Guide
2. Processor
The console processor utilizes Microsoft® Windows to run a specially designed PaletteOS lighting control software.
The processor will not accept nor run standard Windows-based applications. It is only intended for use with the
PaletteOS software application.
3. Accessories and Expansion Devices
Monitor/Touchscreen
The console processor will support any standard CRT or LCD monitor. The monitor must be capable of 1024 x 768 or
higher resolution.
The processor also supports the use of a touchscreen monitor. Due to mouse driver requirements, only ELO
Touchscreens should be used. ELO touchscreens can be purchased from ELO TouchSystems (www.elotouch.com).
The AccuTouch 3000 series models are recommended, since they feature resistive technology (i.e. you can point with
objects other than your finger such as a pen, etc.) Purchase the USB type, NOT serial. If connecting a touchscreen,
some software configuration is required. Refer to "Touch Screen Calibration" on page 41.
Note: Using a touchscreen can enhance the usability of the console software and is highly recommended.
4. Optional Accessories (sold separately)
To purchase any Palette VL products or accessories, please contact your Authorized Strand Lighting Dealer.
Accessories:
67528 USB Key Drive (additional)
67533 USB / VGA Adapter (for third video monitor)
95022 Littlite® Gooseneck Lamp
95481 Dust Cover, presetPalette 32/64, Palette VL (spare)
Handheld Remotes:
66145 Wired Handheld Designer’s Remote with coiled 10 foot cable
66150 Wireless Handheld Remote Kit