Specifications

Elo TouchSystems (800) ELO-TOUCH or [phone] • Fax [phone] • www.elotouch.com
19
MECHANICAL
Input Method Finger or gloved hand (cloth, leather, or rubber) activation
Available Sizes 15" to 21"; visit our Web site for full specifications and
other offerings
ELECTRICAL
Positional Accuracy Standard deviation of error is less than 0.080 in. (2 mm)
Resolution Touchpoint density is based on controller resolution of 4096 x 4096,
plus 255 levels corresponding to touch pressure
Touch Activation Force Typically 2 to 3 ounces (55 to 85 grams)
Controller Board: Serial (RS232) or USB 1.1
OPTICAL
Light Transmission 100%
ENVIRONMENTAL
Temperature Operating: –20°C to 50°C
Storage: –40°C to 71°C
Relative Humidity Operating: 40°C at 90% RH, noncondensing
Altitude Operating: 10,000 ft (3,048 m)
Storage/transport: 50,000 ft (15,240 m)
Chemical Resistance The touch active area of the touchmonitor is resistant to chemicals
that do not affect glass, such as: acetone, toluene, methyl ethyl
ketone, isopropyl alcohol, methyl alcohol, ethyl acetate, ammonia-
based glass cleaners, gasoline, kerosene, vinegar
Electrostatic Protection Per EN 61000-4-2, 1995: Meets Level 4 (15 kV air/8 kV contact
discharges)
Agency Approvals UL, cUL, TUV, CE, FCC Class A
Sealability Can be sealed to meet NEMA 3/3R/5/12/12K/13, IP64 standards;
Elo kiosk and gaming iTouch monitors include a watertight seal.
DURABILITY
Surface Durability Surface durability is that of glass, Mohs’ hardness rating of 7
Expected Life No known wear-out mechanism, as there are no layers, coatings,
or moving parts. iTouch technology has been operationally tested
to more than 50 million touches in one location without failure,
using a stylus similar to a finger.
Warranty See monitor warranty
iTOUCH
SURFACE WAVE
..