User's Manual

Installing the Hand S
trap onto your
The hand strap is designed for easy
in Figure 7, t
he hand strap can be installed onto the tablet in two different orientations
hand use or
for left hand use.
strap screw ports on the top left and bottom right (as you face the back of the tab
of the tablet.
If you plan on using your right hand to hold the tablet,
ports on the top right and bottom left (as you face the back of the tablet) located on the back of
the tablet.
To install the hand strap onto the tablet:
1.
Align the hand strap such
designated top hand strap screw port on the back of the tablet.
tightening the screw.
2.
Align the screw on the other end of the hand strap with the designated bottom hand strap
screw port on the back of the tablet. Fasten
Figure 8 highlights
how the
from each other.
To uninstall the hand strap from the tablet, loosen the two hand strap screws from the hand
strap scre
w ports located on the back of the tablet.
Figure 7. Hand strap can be installed onto tablet in two different orientations:
1) for holding the tablet with left hand (green arrows) and
2) for holding the tablet with right hand (blue arrows). Slotted hand strap screw holder (A)
to be fastened to a top screw port located on the back of the tablet.
trap onto your
Tablet
The hand strap is designed for easy
user
installation/uninstallation to/from the tablet.
he hand strap can be installed onto the tablet in two different orientations
for left hand use.
If you plan to hold the tablet with your left hand
strap screw ports on the top left and bottom right (as you face the back of the tab
If you plan on using your right hand to hold the tablet,
use the hand strap screw
ports on the top right and bottom left (as you face the back of the tablet) located on the back of
To install the hand strap onto the tablet:
Align the hand strap such
that the
slotted screw holder on the hand strap ali
designated top hand strap screw port on the back of the tablet.
Fasten them together by
Align the screw on the other end of the hand strap with the designated bottom hand strap
screw port on the back of the tablet. Fasten
them together by tightening the screw.
how the
two screw holders located at the two ends of the hand strap
To uninstall the hand strap from the tablet, loosen the two hand strap screws from the hand
w ports located on the back of the tablet.
Figure 7. Hand strap can be installed onto tablet in two different orientations:
1) for holding the tablet with left hand (green arrows) and
2) for holding the tablet with right hand (blue arrows). Slotted hand strap screw holder (A)
to be fastened to a top screw port located on the back of the tablet.
User Manual:Elo
®
Tablet
SW602113 Rev A, Page 22 of 40
installation/uninstallation to/from the tablet.
As shown
he hand strap can be installed onto the tablet in two different orientations
for right
If you plan to hold the tablet with your left hand
, use the hand
strap screw ports on the top left and bottom right (as you face the back of the tab
let) on the back
use the hand strap screw
ports on the top right and bottom left (as you face the back of the tablet) located on the back of
slotted screw holder on the hand strap ali
gns with the
Fasten them together by
Align the screw on the other end of the hand strap with the designated bottom hand strap
them together by tightening the screw.
two screw holders located at the two ends of the hand strap
differ
To uninstall the hand strap from the tablet, loosen the two hand strap screws from the hand
Figure 7. Hand strap can be installed onto tablet in two different orientations:
2) for holding the tablet with right hand (blue arrows). Slotted hand strap screw holder (A)