User's Manual

User Manual:Elo
®
Tablet
SW602113 Rev A, Page 11 of 40
15. Dock pin ports (bottom)
When mounting the tablet onto the docking station, align the docking station docking pins with
the tablet docking pins to ensure proper mounting.For more information on how to mount the
tablet onto the docking station, refer to Chapter 3.
16. Near Field Communication(NFC)
Your tablet has Near Field Communication function, refer to “Payment Features” section in
Chapter 2 for more information.
17. Ambient light sensor
The built-in ambient light sensor detects the brightness of the environment and allows the
screen brightness to automatically adjust according to ambient light conditions.
18. Tablet Stylusstring holes
These holes may be used to tether a stylusto the tablet.
19. Tablet Stylusholder port cover
Open the tablet stylusholder port cover to access the tablet stylusholder port. The Elo Tablet
stylus accessorycomes with a holder that can be installed into this port. You can use the holder
to store your tablet stylus.
20. Rear-facing camera
Your tablet has a 2-megapixel rear-facing camera, which may be used for barcode reading
functionality in addition to picture or video capture.
21. Handstrap
Use the hand strap to ease mobile use of the tablet. The hand strap comes with thumb screws
foreasy user installation/uninstallation onto the tablet. The hand strap can be installed onto the
tablet for right hand use or for left hand use. Refer to Chapter 2 for more information on how to
install/uninstall the hand strap onto the tablet.
22. Dock pin ports (top)
When mounting the tablet onto the docking station, align the docking station docking pins with
the tablet docking pins to ensure proper mounting. For more information on how to mount the
tablet onto the docking station, refer to Chapter 3.
23. Battery Screw
Loosen the battery thumb screw to remove the battery from the tablet. Tighten the battery
thumb screw to secure a battery onto the tablet.