User's Manual

User Guide – ELO-KIT-ECMG2-AND
UM600069 Rev A, Page 9 of 26
Audio
Earphone output with microphone input is supported.
Note: If Bluetooth speakers are used, ensure that the speakers are not placed directly in front of
the monitor. This can cause interference and disrupt your listening experience.
Wifi + Bluetooth
The following protocols are supported for Wifi and Bluetooth:
 Bluetooth 4.0+EDR Class 2, A2DP/ HID (Keyboard/Mouse), SPP (printer), Barcode scanner
(HID/SPP) support.
 IEEE 802.11b/g/n; WEP/WPA/WPA2 capable
 iBeacon capable
General Purpose Input/Output (GPIO) Support
The AECM supports a GPIO which can be used under the following conditions:
Max Voltage: 5V
Max Current: 200mA
There are two input connections and one output connection.
Pin 1 5 Volt output connection
Pin 2  Input connection 1
Pin 3  Input connection 2
Pin 4 and Pin 5 are tied to ground
Elo has a cable (PN # E086398) which extends this GPIO connection so that it is easy for
users to connect their own peripherals. This cable can be found on the Elo website.