Owners manual

User Manual: Interactive Digital Signage
SW602296 Rev A, Page 16 of 39
Parameter Available Adjustment
Video Port
Discovery
When enabled, the monitor will automatically switch if a new video port is
connected.
Black Level
The user can choose between Standard, 5%, 10% or 15% black level offset.
The saturation level of the colors change according to the chosen black level offset.
Not available when the video source is from VGA.
Brightness
Sensor
The light sensor can be toggled on or off. When the light sensor is enabled, the
brightness cannot be changed manually.
Sharpness
Adjusts sharpness of the displayed images.
Default: no sharpness adjustment
Sharpness function is disabled when the input source ratio is the same as the
panels native ratio
Auto Adjust
Automatically adjusts the system clock to the input analog VGA video signal,
affecting the H-position, V-position, Clock, and Phase menu items.
Not applicable when using HDMI, DisplayPort video or the Computer Module.
Color
Temperature
Selects the displays color temperature. The available color temperatures are
9300K, 7500K, 6500K, 5500K, 3200K and User Defined.
Default: User Defined with R, G, and B all set to 100.
User Preset
If the User Preset option is selected, the user can change the color temperature by
changing individual R, G, and B gains on a scale from 0 to 100.
If the color space is YUV mode, then Hue and Saturation can be varied in this
menu.
Dynamic Color
Modes
Preset color modes that change the color parameters to enhance color definitions.
Available modes are: Standard, Movie, Gaming, Photo, Line mode, Legacy HDMI
Default: Standard
Legacy HDMI is only available when the video input is the HDMI source.
Audio Select
Allows the user to choose the audio source. The choices are From Video Source,
Line in and ECM Line-in (available only if an ECM is detected)
If there is no Computer Module plugged in, and the video source is HDMI, the
options are: Line In and HDMI.
Default: Video Source.
Recalling
Settings
Selecting “Recall Defaults” restores all factory default settings for OSD-adjustable
parameters (except OSD Language and OSD Position) and for Preset Video Mode
timings.
Serial Protocol
This menu allows the user to switch between the serial protocol and the DDC/CI
protocol.
DDC/CI protocol is used to communicate to a host computer via the video signal.
Default: IIC
Tabletop
Enables or disables the Tabletop Thermal Protection Mode settings
OSD Timer
A
djusts how long a period of OSD button inactivity the Touchmonitor will wait before
closing the OSD. The adjustable range is between 5 and 60 seconds.
Default: 15 seconds
OSD Language
Selects which language the OSD information is displayed in. The available
languages are: English, French, Italian, German, Spanish and Russian.
Default: English.