User manual

User Manual – Interactive Digital Signage
SW601176 Rev B - Page 20 of 49
1. Install the driver onto your computer
• Obtain the necessary APR touch driver from the Elo Touchsystems website
www.elotouch.com
• Follow the steps given by the Elo installation program.
2. Install the APR Calibration file onto your computer.
• Make sure the APR driver has been installed first.
• Insert the touchmonitor’s unique APR Calibration USB Drive into one of the Computer
Module’s USB ports.
• The APR Calibration USB Drive contains only one file. Copy this file into the folder
“C:\Program Files\EloTouchSystems\APRdata”
• Rename the file to “AprCF.bin”
Note:
Do not lose the touchmonitor’s APR Calibration USB Drive or APR
Calibration file! It is unique to your touchmonitor, and required for
that touchmonitor to function. It will not function with any other
Interactive Digital Signage touchmonitor except the one it shipped
with.
If you need to connect this touchmonitor to a different computer, or if
you need to update the touch driver on your computer, you will need
this APR Calibration USB Drive again.