User manual

User Manual – Interactive Digital Signage
SW601176 Rev B - Page 18 of 49
Installing the APR Touch Technology Software
(for Elo Computer Modules with Windows 7 and Windows XP)
Some software installation is required for the APR touchmonitor to work with the Computer
Module. This step is not required for IntelliTouch models.
You will need to plug in an external mouse and/or keyboard into the Computer Module
connector panel to execute these steps.
Visit the Elo TouchSystems website www.elotouch.com for:
• The latest touch driver versions
• Additional touch driver information
• Detailed touch driver installation guides
• Touch drivers for other operating systems
1. Install the APR Calibration file onto the Computer Module.
• Insert the touchmonitor’s unique APR Calibration USB Drive into one of the Computer
Module’s USB ports.
• The APR Calibration USB Drive contains only one file. Copy this file into the Computer
Module folder
“C:\Program Files\EloTouchSystems\APRdata”
• Rename the file to “AprCF.bin”
2. Reboot the Computer Module