Instructions

User Manual: I-Series 2.0 for Windows
UM600348 Rev B, page 24 of 37
I-Series 2.0 for Windows Power Adaptor Support Notice
The following notice will help on the application when you use the Power USB function of your Elo I-Series 2.0 for Windows.
⚫ Do not exceed a total of 100 watts. Take the wattage below and add the Elo Peripherals or your other devices and check that you are under 100
watts. If you need help with the power requirements for your application, please contact Elo support to help you with the set up and calculations.
i2
i3
i5
Max Power
Consumption
(without peripherals)
15.6" models: 30W
21.5" models: 39W
15.6" models: 67W
21.5" models: 77W
15.6" models: 73W
21.5" models: 83W
⚫ The Elo PNs corresponding power adaptor model name list as below table.
Configuration
ELO PN
Part Description
i2/i3/i5
E903506
Power Brick, type C 100W, FSP
Care and Handling
The following tips will help keep your touch computer functioning at an optimal level:
⚫ Disconnect the AC power cable before cleaning.
⚫ To clean the unit (except touchscreen), use a clean cloth lightly dampened with a mild detergent.
⚫ It is important that your unit remains dry. Do not get liquids on or inside the unit. If liquid does get inside, turn the unit off and have a qualified service
technician checks it before you power it on again.
⚫ Do not wipe the screen with a cloth or sponge that could scratch the surface.
⚫ To clean the touchscreen, use window or glass cleaner applied to a clean cloth or sponge. Never apply the cleaner directly to the touchscreen.
Do not use alcohol (methyl, ethyl or isopropyl), thinner, benzene, or other abrasive cleaners.
⚫ Ensure the environmental temperature and humidity are maintained within specification and do no block ventilation slots.
⚫ Touch computers are not designed for outdoors.