User manual

User Manual: Interactive Digital Signage
SW601990 Rev F, Page 18 of 36
Clock
Allows fine adjustments of the panels pixel dot clock.
Not applicable when using HDMI/DisplayPort video or the Computer Module.
Phase
Allows fine adjustments of the panels pixel dot clock phase.
Not applicable when using HDMI/DisplayPort video or the Computer Module.
H-position
Moves the image horizontally on the display in single-pixel increments.
Default: centered.
Not applicable when using HDMI/DisplayPort video or the Computer Module.
V-position
Moves the image vertically on the display in single-pixel increments.
Default: centered.
Not applicable when using HDMI/DisplayPort video or the Computer Module.
Black Level
The user can choose between Standard, 5%, 10% or 15% black level offset.
The saturation level of the colors change according to the chosen black level offset.
Not available when the video source is from VGA.
Color
Temperature
Selects the displays color temperature. The available color temp
eratures are 9300K,
7500K, 6500K, 5500K, and User Defined. If the User Defined option is selected, the
user can change the color temperature by changing individual R, G, and B gains on a
scale from 0 to 100.
Default: User Defined with R, G, and B all set to 100.
Audio Source
Allows the user to choose the audio source. The choices are From Video Source, Line
in and ECM Line-in (available only if an ECM is detected)
If there is no Computer Module plugged in, and the video source is HDMI, the options
are: Line In and HDMI.
Default: Line In.
Color Adjust
The Color Temperature menu can be chosen or Hue and Saturation can be varied in
this menu.
Color Temperature will only be available in the Standard color preference mode. Hue
and Saturation are available in the remaining color preferences.
Color
Preference
Standard, Movie, Gaming, Photo modes can be chosen depending on the users
preference.
Movie, Gaming and Photo mode allow the user to vary the Hue and Saturation
Default: Standard
Other Menu
OSD menu: The Horizontal position, vertical position and OSD timer can be changed
from here.
Language Settings can be changed
Recall Defaults: set the system back to the preset standards
Information: display information about the monitor and system
MDC Protocol: allows the user to choose between DDC/CI and RS232 mode for the
MDC utility
Support & Help: Provide information about help and support
System Temperature: Provides the system Temperature information. If the Elo
computer module is inserted, there will be a seco
ndary line showing that temperature
information.
OSD Timer
Adjusts how long a period of OSD button inactivity the Touchmonitor will wait before
closing the OSD. The adjustable range is between 5 and 60 seconds.
Default: 15 seconds