User manual

User Manual– Interactive Digital Signage
SW601990 Rev A, Page 27 of 32
Chapter 8
Safety & Maintenance
Safety
To avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor
or Computer Module. They are not user-serviceable.
Do not block or insert anything inside any of the ventilation slots.
The touchmonitor is equipped with a 3-wire, grounding power cord. The power cord plug only
fits into a grounded outlet. Do not fit or modify the plug into an outlet that has not been
configured for this purpose. Do not use a damaged power cord. Only use the power cord that
came with your Elo Touch Solutions touchmonitor. Use of an unauthorized power cord might
invalidate your warranty.
Ensure that your installation is equipped to maintain the specified environmental conditions
listed in the units specifications on the Elo Touch Solutions website www.elotouch.com.
Environmental conditions for transportation and storage
Temperature:
Operating 0°C to 40°C
Storage/Transportation -20°C to 50°C
Humidity (non-condensing) :
Operating 20% to 80%
Storage/Transportation 10% to 95%
Altitude:
Operating 0 to 3,658m
Storage/Transportation 0 to 12,192m
Caution for Computer Modules
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.