900L 19-inch LCD Touchmonitor User Guide [Model ET1900L]
Elo TouchSystems 1900L 19-inch LCD Touchmonitor User Guide Revision B P/N E483389 Elo TouchSystems 1-800-ELOTOUCH www.elotouch.
Copyright © 2008 Tyco Electronics. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, optical, chemical, manual, or otherwise without prior written permission of Elo TouchSystems. Disclaimer The information in this document is subject to change without notice.
Table of Contents Chapter 1: Introduction ....................................................................5 About the Product ............................................................................................................. 5 Precautions ......................................................................................................................... 6 Chapter 2: Installation and Setup ...................................................7 Unpacking Your Touchmonitor ..................
C H A P T E R 1 INTRODUCTION About the Product The Elo TouchSystems 1900L touchmonitor senses touch on the display in a completely new way, by recognizing the unique pattern of sounds. Consisting only of a glass overlay mounted in front of the LCD panel, Elo’s 1900L zero-bezel Acoustic Pulse Recognition (APR) delivers benefits that combine the ultimate in optical qualities with a stylish, easy to clean, seamless front face.
• • • • • VGA and DVI-D video input (DVI-D not available in Europe) • VESA compliance makes wall or arm-mounting possible Space-saving built-in speakers Sealed screen is resistant to water, dust, grease One-time factory calibration for easy deployment and integration Pure glass construction provides superior optical performance and the true-flat surface is easy to clean For more detailed information, please visit our website: www.elotouch.com.
C H A P T E R 2 INSTALLATION AND SETUP This chapter discusses how to install and set up your LCD touchmonitor and how to install Elo TouchSystems driver software.
Unpacking Your Touchmonitor Check that the following items are present: Input Audio Cable Power Cable Touchmonitor AND/ OR USB Cable Serial Cable (not available with APR models) AND/ OR VGA Video Cable DVI-D Cable (not available with European models) TouchTools or APR CD and Quick Install Guide Elo TouchSystems 1900L User Guide 8
Connecting the Cables to the Touchmonitor and Computer Connector Panel Underneath the Monitor Power DC LED USB Serial in DVI-D VGA Audio Audio Output Input To connect the touchmonitor to the computer: 1 Tilt the monitor to reveal the connector panel in the recessed area underneath the bottom edge of the monitor. 2 Connect the AC power cable to the connector panel and connect the other end to the power outlet. 3 Connect either the USB cable OR the serial cable to the connector panel.
Installing the Touch Driver Your Elo touchmonitor is Plug-and-Play compliant. Information on the video capabilities of the touchmonitor is sent to the video display adapter when the computer’s operating system starts. If the computer’s operating system detects the touchmonitor, follow the instructions on the screen to install a generic Plug-and-Play monitor. Elo TouchSystems provides touchscreen driver software that allows your touchmonitor to work with your computer. Drivers are located on the enclosed CD.
Monitor Overview and Dimensions Note: Dimensions are in millimeters. Detailed mechanical drawings can be found at: www.elotouch.
Monitor Mounting and Orientation Option 1— Mount on Flat Surface with Stand Landscape Orientation shown above Portrait Orientation shown above Elo TouchSystems 1900L User Guide 12
Monitor Mounting and Orientation (continued) Option 2 — Mount using VESA Rear view of monitor in landscape orientation shown above Rear view of monitor in portrait orientation shown above Elo TouchSystems 1900L User Guide 13
Monitor Mounting and Orientation (continued) Attaching the Stand to a Mounting Surface Option 1 — Mounting from the top. Slide out stand base cover. Use 4 screws to attach stand to surface. Option 2 — Mounting from the bottom. Attach to the surface using the holes shown above.
C H A P T E R 3 OPERATION About Touchmonitor Adjustments Your touchmonitor probably does not require adjustment. However, variations in video output and application may require adjustments to your touchmonitor to optimize the quality of the display. For best performance, your video source should be at 1440 X 900 resolution, at 56–76 Hz refresh rate. Operating in other resolutions degrades video performance.
On-Screen Display (OSD) Control Panel 1 2 3 4 5 The On-Screen Display (OSD) control panel is located on the side of the monitor, as shown above. OSD Control Buttons The OSD control buttons allow you to change settings on the monitor screen.
DOWN 1) Adjusts audio volume or selects Mute option (if no OSD is currently displayed on screen) 2) Decreases value of OSD adjustment choice SELECT 1) Selects Analog or Digital 2) Selects adjustment choices from the OSD menus POWER Turns the monitor on or off After adjusting the values, the monitor automatically saves the changes. OSD Lock/Unlock You can lock and unlock the OSD feature. The monitor is shipped with the OSD unlocked, no OSD can be displayed or used.
OSD Control Options Auto Adjust • Automatically adjusts video timing parameters (VGA only). Luminance Brightness • Adjusts the brightness. Contrast • Adjusts the contrast. Image Setting (VGA only) H. position • Moves the image left or right on the screen. V. position • Moves the image up or down on the screen. Clock • Stretches the image horizontally. Phase • Adjusts the phase of the dot clock to image data. Color • Sets the color temperature. Audio • Adjusts audio volume or selects Mute option. OSD OSD H.
Recall Color Recall • Restores default color temperature settings. Recall Defaults • Restores original factory settings for H-position, V-position, Clock, and Phase for the current video mode (VGA only). • Restores original factory settings for all other parameters and video inputs, except language. Miscellaneous Aspect Ratio • Selects Fill Screen or Fill to aspect ratio. Sharpness • Adjusts sharpness of video. DDCCI Function • Enables or disables the Display Data Channel Command Interface (DDCCI) function.
Preset Display Modes The touchmonitor comes with preset settings for commonly used video modes. It automatically adjusts the picture size and centering for any of the video modes listed in Appendix B, 1900L Specifications, under “Preset Display Modes.
Speakers and Audio Features The touchmonitor includes two built-in speakers. To use the speakers, plug in the audio cable to the Audio Input port shown in the illustration below, and connect the other end to your computer. To use headphones, plug in the headphones to the Audio Output port shown in the illustration below. When headphones are connected, the sound plays through the headphones only.
C H A P T E R 4 TROUBLESHOOTING If you are experiencing trouble with your touchmonitor, refer to the following table. If the problem persists, please contact your local dealer or our service center. Elo Technical Support numbers are listed on the next page. Solutions to Common Problems Problem Suggestion(s) The monitor does not respond after you turn on the system Check that the monitor’s Power Switch is on. Turn off the power and check the monitor’s power cord and signal cable for proper connection.
Technical Support To contact technical support online, please go to: www.elotouch.
APPENDIX A TOUCHMONITOR SAFETY This manual contains information that is important for the proper setup and maintenance of your touchmonitor. Before setting up and powering on your touchmonitor, read through this manual, especially Chapter 2 (Installation and Setup), and Chapter 3 (Operation). 1 To reduce the risk of electric shock, follow all safety notices and never open the touchmonitor case. 2 Turn off the product before cleaning.
Care and Handling of Your Touchmonitor The following tips will help keep your Elo touchmonitor functioning at the optimal level. • To avoid risk of electric shock, do not disassemble the touchmonitor. There are no user-serviceable parts inside the touchmonitor. Remember to unplug the touchmonitor from the power outlet before cleaning. • Do not use alcohol (methyl, ethyl or isopropyl) or any strong solvent. Do not use thinner or benzene, abrasive cleaners or compressed air.
APPENDIX B TECHNICAL SPECIFICATIONS Elo TouchSystems 1900L User Guide 26
1900L Specifications Model ET1900L LCD Display 19” TFT active matrix panel Display Size 408.24(H) x 255.15(V) mm Pixel Pitch .282(H) x .
Display Color 16.7 Million Viewing Angle Vertical - 80° to 80° Horizontal - 80° to 80° Input Video Signal • RGB Analog Video (0.
REGULATORY INFORMATION I. Electrical Safety Information: A) Compliance is required with respect to the voltage, frequency, and current requirements indicated on the manufacturer’s label. Connection to a different power source than those specified herein may result in improper operation, damage to the equipment, invalidation of warranty, or a fire hazard if the requirements are not followed. B) There are no operator-serviceable parts inside this equipment.
B) Notice to Users in Canada: This equipment complies with the Class B limits for radio noise emissions from digital apparatus as established by the Radio Interference Regulations of Industry Canada. C) Notice to Users in the European Union: Use only the provided power cords and interconnecting cabling provided with the equipment.
interference, try to correct the interference by using one or more of the following measures: i) Move the digital device away from the affected receiver. ii) Reposition (turn) the digital device with respect to the affected receiver. iii) Reorient the affected receiver’s antenna. iv) Plug the digital device into a different AC outlet so the digital device and the receiver are on different branch circuits. v) Disconnect and remove any I/O cables that the digital device does not use.
WARRANTY Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller warrants to Buyer that the Product shall be free of defects in materials and workmanship. With the exception of the negotiated warranty periods; the warranty for the touchmonitor and components of the product is 3 years. Seller makes no warranty regarding the model life of components. Seller’s suppliers may at any time and from time to time make changes in the components delivered as Products or components.
uct less depreciation calculated on a straight-line basis over Seller’s stated Warranty Period. THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF WARRANTY. EXCEPT FOR THE EXPRESS WARRANTY SET FORTH ABOVE, SELLER GRANTS NO OTHER WARRANTIES, EXPRESS OR IMPLIED BY STATUTE OR OTHERWISE, REGARDING THE PRODUCTS, THEIR FITNESS FOR ANY PURPOSE, THEIR QUALITY, THEIR MERCHANTABILITY, THEIR NONINFRINGEMENT, OR OTHERWISE.
www.elotouch.com Get the latest... • Product information • Specifications • News on upcoming events • Press release • Software drivers • Touch Monitor Newsletter Getting in Touch with Elo To find out more about Elo’s extensive range of touch solutions, visit our Website at www.elotouch.com or simply call the office nearest you: Elo TouchSystems 301 Constitution Drive Menlo Park, CA 94025 USA (800) ELO-TOUCH (800) 356-8682 Tel 650-361-4800 Fax 650-361-4747 eloinfo@elotouch.
